Coin Cell Lab Machine
Pouch Cell Lab Machine
Cylindrical Cell Lab Machine
Ball Milling
Mixer
Film Coating
Roll Press
Electrode Cutting
Battery Testing Equipment
Oven
Glove Box
Super Capacitor Machine
Material

Address: 3F,Bldg 6,Haihai Da Tianliao

Technology Park,Yutang Subdistrict,

Guangming ,Shenzhen ,China

*Your Name (required)
*Your Email (required)
Phone (required)
*Your Message (required)

350mm Width Battery Electrode Slitting Machine


STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

Product Details



Similar Product

Battery Electrode Rolling Press Machine with Digital Micrometer

STC-DDG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

切片机-2.jpg

Coin Cell Electrode Cutting Machine for Laboratory Research

STC- PT-10 is a coin cell disc cutter for electrode precision cutting, which can be easily placed into a glovebox.

涂膜机-1.jpg

Lab Battery Tape Casting Machine for Laboratory Battery Rsearch

STC-TM-300 is a compact tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

分条机B-1.jpg

350mm Width Battery Electrode Slitting Machine

STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

The machine integrates ultrasonic welding and automatic tab feeding function, enhancing the efficiency and precision of the battery production. The equipment mainly consists of ultrasonic generator, transducer, upper and lower horn, pneumatic parts, frame and so on. The upper and lower horns are made of new alloy materials with good abrasion resistance.

分体式涂布机-21(1).jpg

Lab Transfer Lithium-ion Battery Electrode Coater

The Intermittent coating machine is a three-roller transfer coating equipment, which can be used for continuous coating and intermittent coating. It is convenient to apply for coating on various substrates, especially used for lithium-ion battery industry.

搅拌机10L.png

10L Planetary Vacuum Lithium-ion Battery Slurry Mixing Machine

The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.

搅拌机5L-1.jpg

5L Lab Planetary Vacuum Mixer and Dispersing Machine

The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.The maximum volume of the equipment is 5L.

搅拌机60L-1.jpg

60L Planetary Vacuum Mixer for Battery Slurry Mixing

The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.

热压化成机-1.jpg

Horizontal Hot Press Formation Machine for Pouch Cell

The equipment is mainly used for pouch lithium-ion batteries to be formation under hot-pressing condition. It can not only combine the existing battery formation process, drying and shaping process, but also shorten the formation time, reduce the battery production cycle and reduce labor.

圆柱电池三封机-1.jpg

Hydraulic Cylindrical Cell Third Sealing Machine

The machine is mainly used for the third sealing of cylindrical batteries to make minor adjustments for the height and edges of the case.

全自动模切机.png

Auto Electrode Die Cutting Machine for Pouch Cell Fabrication

STC-BMQ-A300 is applied to lithium battery cathode and anode electrode automatic die cutting. The equipment consists of automatic unwinding device, automatic correction device, electrode positioning device, electrode punching and cutting device, electrode sucking device, electrode placing device, driving traction device, tension device, automatic waste collection device.

提升机.jpg

Pneumatic Lifter for Lifting Transfer Bucket Lid

STC-EQT-60 is suitable for lifting the lid of transfer bucket. The lid with the mixing head on the transfer bucket is very heavy and can be lifted very easily with a lifter.

中转桶.jpg

Transfer Bucket for 60L Planetary Vacuum Mixer

After the mixer has finished making the slurry, pull the bucket to the lifter, then cover the mixing head and combine it as a slurry transfer bucket. Complete the storage and transfer of slurry from the mixing workshop to the coating workshop.

分体式涂布机-1.jpg

Roll to Roll Coating Machine with Three-Section Drying Oven for Battery Electrode Production

STC-TMZ-300F3 is a three-roller transfer coating equipment, which can be used for continuous coating and intermittent coating. It is convenient to apply for coating on various substrates, especially used for lithium-ion battery industry. This equipment is convenient for users to use, can meet the requirements of coating accuracy and consistency, and with excellent drying effect. It is the ideal choice for lithium-ion batteries, super capacitors, nickel batteries, etc.

两门真空干燥箱-3.jpg

90L 2-Chamber Vacuum Drying Oven for Heating Battery Electrode

STC-KZK-902Q2 is a 2 chambers vacuum drying oven which is widely used in laboratory. It is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time is adjustable, which can maximally reach to 200℃.

真空干燥箱90L-1.jpg

90L Vacuum Drying Chamber for Heating Battery Electrode

STC-KZK-904 is a compact vacuum drying oven, widely used in laboratory. It is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time is adjustable, which can maximally reach to 200℃. It’s a 90L oven with 2-layer brackets.

NMP-A-2(1).jpg

NMP Solvent Treatment System for Filtering Exhaust Gases from the Coating Process

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during the drying process of the coating machine, and achieves the effects of dust removal and exhaust gas purification.

立式圆柱电池滚槽机-1.jpg

Vertical Grooving Die Cylindrical Cell Grooving Machine for Lithium Battery Making

STC-CGC-V18 is the new generation model of TICO. Huge adjustments have been made in the position of the grooving die, from horizontal to vertical placement, and this adjustment produces a more stable battery. There are various sizes of grooving dies as options for users, like 18650, 26650, 21700, 32650. This machine is suitable for uniform automatic grooving of cylindrical steel cases (or capacitor aluminum cases).

电动对辊机100-1.jpg

100mm Width Electric Rolling Press Machine for Battery Research

STC-DDG-100 is a compact electric roll press used for battery electrode pressing. The pressing gap and pressing speed is adjustable. It is compact size perfect for battery research.

扣式手动冲片机-2.jpg

CR2032 Coin Cell Electrode Punching Machine for Button Cell Fabrication

STC-ASC-24 disc cutter is used for coin cell precise round disc cutting. Standard cutting die φ3~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

预封静置侧封-1.jpg

3-in-1 Hot Sealer for Edge & Vacuum Sealing & Vacuum Standing Equipment for Pouch Cell R&D

It is a 3 in 1 machine for pouch cell research. It can be compatible with the following functions. Pouch cell top & side heat sealing before electrolyte injection. Pouch cell vacuum standing for electrolyte diffusion, different parameter can be saved. Pouch cell vacuum hot sealing.

扣式电动冲片机-1.jpg

Automatic Coin Cell Electrode Punching Machine

It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.

圆柱连续封口机-1.jpg

New-designed Autoamtic Crimping Machine for Cylindrical Cell

It is an automatic crimping machine designed for cylindrical cell case crimping, feeding &discharging automatically.

三合一套餐.png

Labotatory Slot Extrusion Film Coating Packages for Lithium-ion Battery R&D

It adopts the slot extrusion film coating (doctor blade coating, four-side film coating, etc. are optional). It is mainly used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

圆柱连续封口机-1.jpg

New-designed Autoamtic Crimping Machine for Cylindrical Cell

It is an automatic crimping machine designed for cylindrical cell case crimping, feeding &discharging automatically.

涂膜烘干机-1(L).jpg

Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck

STC-TMH-T300 is a compact film tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.

扣式手动封口机-1.jpg

Manual Hydraulic Crimper for CR20xx Series Coin Cell Cases

The STC-ASF-20 compact hydraulic crimping machine is used for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20xx series crimping die is included as standard, the other crimping die set is optional. Coin cell disassembly die and tablet pressing die can be optional.

加热对辊机100-2.jpg

100mm Width Hot Calender for Lab Battery Research

STC-DRG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

叠片机A-3.jpg

TICO New Design Semi-auto Electrode Stacking Machine

STC-BDP-MA200 is a new designed semi-auto electrode stacking machine, which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch cell core.

扣式手动冲片机-1.jpg

Coin Cell Electrode Punching Machine for Button Cell Fabrication

STC-ASC-24 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

圆柱连续滚槽机-1.jpg

New-designed Autoamtic Grooving Machine for Cylindrical Cell

It can carry out uniform automatic grooving for cylindrical cell can, feeding & discharging automatically, high efficiency, time saving and labor saving.

半自动卷绕机JR90-2.jpg

Pouch Cell Manual Winding Machine

STC-CJR-M30 is a compact desktop manual winding machine for winding pouch cell electrode & separator to make a battery cell core. With optional cylindrical cell winding die, it can be used for cylindrical cell winding.

圆柱手动封口机-2.jpg

Manual Hydraulic Cylindrical Cell Crimping Machine for Lab Battery

The STC-CSF-18 is a compact hydraulic crimping machine for all types of cylindrical cell crimping for battery labs, such as 18650,26650,21700,AA,AAA,etc. Small size allow it to be put into glove box through big antechamber.

手动立式对辊机200新-1.jpg

Manual Calendering Equipment for Battery Electrode Making

STC-DSL-150 manual calendering equipment is used for battery electrode making after coating and drying. It is a bench-top, manual operation with a 150mm width roller, easy to operation.

扣式手动冲片机-3.jpg

Compact Disc Cutter for Coin Cell Separameter Making

STC-ASC-24 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

挤压供料泵-3.jpg

Plunger Pump Slurry Feeding Device

It provides power supply for slurry slot extrusion film coating.

扣式手动拆卸模-1.jpg

Disassembly Die for Coin Cell CR20xx Series

This is the coin cell decrimping die for CR20xx series, and it is made of stainless steel naterial.

圆柱气动封口机-1.jpg

Cylindrical Cell Gas Driven Crimping Machine for Battery Research

The STC-CQF-18 is a compact gas driven crimping machine for all types of cylindrical cell crimping, such as 18650,26650,AA,AAA, etc. It is perfect to use it into glove box without leakage.

冲壳机200-1.jpg

Semi-auto Pouch Cell Case Punching & Forming Machine

STC-BCK-SM200 semi-auto pouch cell case punching machine is used for aluminum-laminated case forming. IR sensor, double start buttons and visual protection cover for safety operation.

模切机280-1.jpg

Semi-auto Battery Electrode Die Cutter for Pouch Cell Research

STC-BMQ-SM280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.

电动对辊机100-2.jpg

Electric Calender with Winder & Unwinder

STC-DDG-100S is a compact electric roll press machine with winding &unwinding device, which can be used for battery electrode pressing. The pressing thickness and speed can be adjusted.

挤压式涂膜器-2.jpg

Slot Die Film Applicator

It is used for film coating on sheet-type substrate surface. It is compatible with slot extrusion coating and doctor blade coating.

扣式电动封口机-1.jpg

CR2032 Compact Electric Coin Cell Crimping Machine

STC-ADF-20 is a compact electric crimper for CR2016,CR2025,CR2032, the other crimping die set can be optional. It is touch screen controlled with high automation. Stainless steel crimping die, anti-corrosion and durable.

分条机 FT300-2.jpg

Desktop Semi-auto Battery Electrode Slitting Machine for Cylindrical Cell

STC-CFT-D300 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

模切机280-1.jpg

Semi-auto Pouch Cell Electrode Die Cutter for Lab Battery Making

STC-BMQ-SM280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.

扣式气动封口机-1.jpg

Pneumatic Crimping Machine for CR20xx Series Coin Cell Assembly

The STC-AQF-20 is a compact gas driven crimping machine for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20XX series crimping die is included as standard, the other crimping die set is optional. It is perfect to be used inside of glovebox from big antechamber, no leakage.

涂膜烘干机800-1.jpg

Large Vacuum Tape Casting Machine with Top Cover Heater for Battery Electrode

STC-TMH-T800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.

气动模切机85-2.jpg

Compact Gas Driven Electrode Die Cutter for Pouch Cell Research

STC-BMQ-G120 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.

加热对辊机带收放卷-1.jpg

100mm Width Hot Calender for Lithium Battery Electrode Rolling Press with Winder &Unwinder

STC-DRG-100S is used for Lab battery electrode rolling press after coating and drying process. It can equip with winding & unwinding device for battery electrode after calendaring. Two sets of digital dial indicator for pressing thickness setting easily, simple operation.

涂膜机300-3.jpg

Compact Vacuum Tape Casting Machine for Battery Laboratory

STC-TM-300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.

手持冲片机-3.jpg

Hand-held Coin Cell Disc Cutter for Electrode Making

STC-ASCC-50 is a hand-held manual disc cutter for cutting round discs, different diameter is optional. It is widely used for battery electrode cutting, foil material cutting, sampling, etc.

圆柱卷绕机JR90-1.jpg

Cylindrical Cell Manual Winding Machine

STC-CJR-M30 is a compact desktop manual winding machine for winding cylindrical cell electrode & separator to make a battery cell core. The winding speed is adjustable.

热封机200-1.jpg

Pouch Cell Case Heat Sealer for Aluminum-laminated Case

STC-BRF-G200 is used for pouch cell aluminum laminated case top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.

手动模切机-3.jpg

Compact Hydraulic Die Cutting Machine

It is used for battery electrode die cutting for pouch cell cathode&anode. Compact size can be put inside glove box.

加热对辊机带压力传感器-1.jpg

100mm Width Vertical Hot Calender with Pressure Gauge

It is an electric calender used for lab battery material & non-ferrous material rolling press with heating, the thickness of rolling press is adjustable and easy to operate.

滚槽机-1.jpg

New Design Cylindrical Cell Grooving Machine for Lithium Battery Making

STC-CGC-H18 is TICO TECHNOLOGY new product. It is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650,26650,21700,and other cylindrical cells.

注液泵ZYB-01-3.jpg

Lab Liquid Filling Pump Device for Pouch Battery Electrolyte Injecting

It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.

扣式电动冲片机-1.jpg

Automatic Coin Cell Electrode Cutting Machine

It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.

连续分条机-1.jpg

Roll to Roll Continuous Slitting Machine for Battery Electrode Making

It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.

液压对辊机DG300-1.jpg

Continuous Hydraulic Calendaring Machine for Battery Electrode Fabrication

STC-DYG-300 is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.

涂膜烘干机 TMHD-250-1.jpg

300mm Film Coating Equipment with Bottom Heating Device

STC-TMH-B300 is a large electrode film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

预封机200-2.jpg

Lab Vacuum Pre-sealing Equipment for Pouch Cell Preparation

STC-BYF-200 is a laminated-aluminum case/cup hot sealing equipment for polymer pouch cell pre-sealing after the battery electrolyte injection into the cell.

单针点焊机-1.jpg

Pneumatic Cylindrical Cell Spot Welding Machine for Lab Research

This product is the enormously popular AC pluse tab welder, controlled by single chip microcomputer. Its capability is more stable and reliable. It is designed for producing high standard NiCr, Ni-Mh, Li batteries, used for welding cylinder cell negative terminal and tab (single pin welding).

涂布机-2.jpg

Transfer Roll to Roll Film Coating Machine for Lithium Battery Electrode

This machine a three roller transfer coating equipment, which can be used for continuous coating and intermittent electrode coating, and it is convenient to apply for surface coating for various substrates. Especially used in the lithium ion battery electrode coating.

横切机300-1.jpg

Automatic Roll-to-Sheet Battery Electrode Cutting Machine

STC-BHQ-300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.

移液器-1.jpg

Single-channel Micro-pipette Lab Transfer-pipette for Coin Cell Making

Transferpette® electronic pipettes combines the globally proven properties of mechanical piston operated air displacement pipettes by BRAND with the advantages of an electronic device.

液压对辊机DG300-2.jpg

Hot Hydraulic Calender with Winder &Unwinder

STC-DYG-300RS is a hot hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.

二封机200-2.jpg

Pouch Cell Final Vacuum Sealing Machine with Auto Piercing Function

STC-BEF-200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing.

液压对辊机DG300-2.jpg

Roll to Roll Hydraulic Calendaring Machine with Winding & Unwinding Device

STC-DYG-300S is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.

圆柱电池拆卸机-1.jpg

Cylindrical Cell Case Disassembly Machine for Performance Testing

It is mainly used for cylindrical cell case disassembly after the cell case crimping, in order to test the battery performance. Different die can be equipped for various size cylindrical cell.

溶剂处理系统-1.jpg

NMP Filtration System for Battery Coating

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.

分条机 FT300-1.jpg

Desktop Semi-auto Battery Electrode Slitting Machine

STC-CFT-D300 is a semi-auto slitting machine for battery electrode for battery research. The slitting width can be made according to requirement.

测试仪10mA-1.jpg

8 Channels 5V10mA Battery Tester for Coin Cell Lab Research

STC-4008Tn-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

扣式手动冲片机-3.jpg

Compact Disc Cutter for Coin Cell Separator Fabrication

STC-ASC-24 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

涂布机3箱-1.jpg

Continuous Roll to Roll Transfer Film Coating Machine with Three Parts of Drying Chamber for Battery Polit Line

STC-TMZ-300F3 is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.

涂膜烘干机800-2.jpg

Large Vacuum Tape Casting Machine with Top Cover Heater for Cylindrical Battery Electrode

STC-TMH-T800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.

加热对辊机200-1.jpg

200mm Width Calender with Heating for Electrtode Rolling Press

STC-DRG-200 is used for battery electrode calendering for lab battery research after coating and drying. It has a 200mm width roller and equipped with digital dial indiactor which owns higher working efficiency.

注液静置-1.jpg

2-in-1 Vacuum Electrolyte Filling & Standing Machine

It is used for the electrolyte injection and vacuum standing process for battery. It adopts vacuum first, then liquid injection and vacuum standing. The electrolyte has high precision, absorption consistency and high reliability.

分条机 FT300-4.jpg

Semi-auto Lithium Battery Electrode Slitting Machine with Winder &Unwinder

STC-CFT-D300S semi-auto slitter is used for lab battery electrode slitting. It is an desktop, easy to operate.

扣式手动封口机-2.jpg

Coin Cell Disassembling Machine for Battery Research

The STC-ACX2X compact hydraulic disassembling machine used for all types of coin cell cases disassembling, such as CR2032, CR2450, etc. CR20xx series disassembling die is included as standard, the other die set is optional. Coin cell crimping die can be optional and easy to replace.

挤压式涂布机3箱-1.jpg

Slot Die Roll to Roll Electrode Film Coating Machine

This machine is applied in Lithium-ion battery electrode coating process of cathode & anode. The slot extrusion coating die is used for non-contact coating to substrate, which can realize the continuous, intermittence, stripe film coating and etc.

加热对辊机100-2.jpg

Heat Rolling Press Machine for Cylindrical Cell Research

STC-DRG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

预封静置-1.jpg

Lab Multi-functional Pouch Cell Machine for Battery Vacuum Diffusion & Pre-sealing Process

STC-BYF-200J is is a 2 in 1 machine for pouch cell research. It can be compatible with the following functions.Pouch Cell vacuum standing for electrolyte diffusion after electrolyte injection;Pouch cell vacuum sealing after electrolyte diffusion.

静置箱300-2.jpg

Electrolyte Vacuum Diffusion Machine for Polymer Pouch Battery

STC-BJZ-300 is mainly used for absorbing the electrolyte and making it mix with electrode more completely under the condition of vacuum after injecting electrolyte to punch cell and cylindrical cell. The whole equipment is made of high-quality electronic component and materials.

扣式手动封口模-1.jpg

Coin Cell Crimping Die for CR20xx Series

This is the coin cell crimping die for CR20xx series, and it is made of stainless steel naterial.

涂布机2箱-1.jpg

Continuous Roll to Roll Transfer Film Coating Machine with Two Parts of Drying Chamber for Battery Polit Line

STC-TMZ-300F2 is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.

卧式对辊机-1.jpg

Horizontal Manual Rolling Press Machine for Laboratory Research

STC-DSW-100 is a hand operation batteryelectrode rolling press machine after coating and drying. It is bench-top and compact dimension, 100mm width roller, and easy for operation.

连续分条机-1.jpg

Roll to Roll Continuous Cylindrical Cell Electrode Slitting Machine

It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.

卷绕机7508YZ-1.jpg

Semi-auto Winding Machine for Cylindrical Cell

It is used for cylindrical cell winding, manually load the electrode,the winding will be completed automatically.

电动对辊机100-1.jpg

4'' Width Electric Roll Press Machine for Coin Cell Electrode Calendering

STC-DDG-100 is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.

热封机330-1.jpg

400mm Width Pouch Cell Hot Sealer for Aluminum-laminated Film Battery Cup

STC-BRF-G400 is used for Polymer pouch cell aluminum laminated cup top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.

涂膜烘干机250-1.jpg

Automatic Vacuum Tape Casting Machine with Heating Cover & Vacuum Chuck

STC-TMH-T300 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.

新棟力超声焊机1KW-2.jpg

Ultrasonic Welding Machine for Battery Lab Research

STC-BCH-1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.

二封机300-3.jpg

300mm With Pouch Cell Final Vacuum Sealing Machine with Auto piercing Device

STC-BEF-300 vacuum sealer is used for pouch cell secondray hot sealing after electrolyte filling and battery formation. It is equipped with auto piercing needle for degassing the cell and do a secondary sealing under vacuum condition. 300mm copper sealing blade with good heating transfer conduction, touch screen controlled with high automation.

新棟力超声焊机1KW-2.jpg

Ultrasonic Welding Machine for Battery Lab Research

STC-BCH-1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.

行星球磨机A4-3.jpg

4x500ml Planetary Ball Miller for Lab Research

STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

注液泵ZYB-01-1.jpg

Lab Filling Pump Device for Cylindrical Battery Electrolyte Injection

It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.

电动顶侧封机-1.jpg

Electric Top& Side Edges Hot Sealing Machine for Pouch Cell

It is mainly used for pouch cell case top &side edges hot sealing, especial in vacuum glovebox. It is electric driven, no gas required.

杯式真空搅拌机-1.jpg

Compact Slurry Vacuum Mixer for Coin Cell Research

STC-EBJ-150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It is with 150ml mixing container, other volume of mixing container is optional.

叠片机B-1.jpg

Pouch Cell Electrode Stacker Stacking Machine for Battery Core Making

STC-BDP-MB200 is a semi-auto stacker, which is used for pouch cell anode, cathode and separator film stacking in "Z" shape to make a battery core. It is feeding material manually. Electrode position correction and laminating process are completed automatically.

切边机-1.jpg

Pneumatic Edges Cutting Machine for Pouch Cell Al-laminated Case

It is used for pouch cell cup edges trimming after pouch cell Al-laminated film forming.

圆柱注液机35工位-1.jpg

35 Working Stations Electrolyte Injecting & Vacuum Standing Machine for Cylindrical cell

It is a multi-working stations machine for battery electrolyte injection and vacuum standing process. The electrolyte has high precision, absorption consistency and high reliability.

叠片机C-1.jpg

TICO New Semi-auto Stacking Machine for Pouch Cell Making

STC-BDP-SMC200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.

老款真空干燥箱-1.jpg

50L Compact Vacuum Drying Oven for Coin Cell Research

STC-KZK-502 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.

圆柱注液机-1.jpg

Vacuum Electrolyte Filling & Standing Machine for Cylindrical Cell Making

It is suitable for supercapacitor & battery electrolyte injection and standing.

新棟力超声焊机1KW-2.jpg

1000W Ultrasonic Mental Spot Welding Machine for Aluminum &Copper Foil

STC-BCH-1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.

涂膜机300-2.jpg

Compact Vacuum Tape Casting Machine for Coin Cell Making

STC-TM-300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.

圆柱自动封口机-1.jpg

Automatic Cylindrical Cell Crimping Mahcine for Lab Battery Pilot Line

It is an automatic crimping machine for cylindrical cell case with automatic feeding & discharging.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

1000W Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

1000W Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

1000W Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

1000W Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

1000W Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.

预封静置-3.jpg

2-in-1 Vacuum Standing & Hot Pre-sealing Equipment for Lab Polymer Cell Research

STC-BYF-200J is a 2-in-1 machine for pouch cell research. The key feature of this machine is compatible with the following two functions. Vacuum standing for electrolyte diffusion after electrolyte filling and hot sealing for pouch cell first sealing.

单节单工位手套箱.jpg

Internet of Things Vacuum Glovebox with Gas Purification System H2O & O2 < 1ppm

STC-VGB-11S is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.

行星球磨机4A-1.jpg

4x500ml Planetary Ball Miller for Cylindrical Cell Lab Research

STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

预封机200-3.jpg

Vacuum Sealing Machine for Pouch Cell Preparation

STC-BYF-200 used for aluminum laminated pouch cell vacuum hot sealing after electrolyte injection into cell.

测试仪50mA-1.jpg

8 Channels 5V10mA Battery Analyzer System for Lab Coin Cell Research

STC-4008Tn-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

行星搅拌机XJB-4-2.jpg

500ml Planetary Slurry Vacuum Mixer for Lab Cylindrical Cell Research

STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

瓶口数字滴定器50ml-1.jpg

Bottle Top Burettes Titreet for Coin Cell Electrolyte Filling

It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.

搅拌机5L-1.jpg

5L Planetary Vacuum Slurry Mixing Machine for Cylindrical Cell Making

STC-EXJ-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.

气动冲壳机-1.jpg

Gas Driven Pouch Cell Case Forming Machine for Pouch Cell Preparation

STC-BCK-G65 is a gas driven machine for aluminum-laminated film pouch cell case forming.The case punching depth can be adjustable.

四门圆筒真空烤箱-1.jpg

Four-door Circular Vacuum Oven for Cylindrical Cell

STC-KZK-4D is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.

气动模切机85-2.jpg

Compact Gas Driven Electrode Die Cutter for Pouch Cell Research

STC-BMQ-G85 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.

涂布机-1.jpg

Roll to Roll Coater Equipment for Lithium Cylindrical Cell Electrode

It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.

手动模切机-1.jpg

Compact Manual Hydraulic Die Cutting Machine for Pouch Cell

It is used for battery electrode die cutting for pouch cell cathode & anode. Compact size can be put inside glove box.

溶剂处理系统-1.jpg

NMP Filtration System for Battery Coating

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.

热压机200-1.jpg

Hot Flat Pressing Machine for Battery Research

STC-BRY-200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking /winding to make it easy to put into aluminium-laminated case and pouch cell formation. The heating pressing die size is 200 x 200mm. The heating temperature room temperature ~ 250℃ adjustable.

单节双工位手套箱.jpg

Single-sided Double Stations Vacuum Glove Box for Cylindrial Cell Battery Research

STC-VGB-12S is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.

三门烤箱-1.jpg

3 Layers High Vacuum Degree Drying Oven for Laboratory

The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.

箱式炉-1.jpg

Box-type Drying Furnace for Lab Research

This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc.

测试仪 5V12A-1.jpg

5V12A 8 Channels Battery Testing Equipment for Cylindrical Cell

STC-4008Tn-5V12A is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

卷绕机10060ZT-1.jpg

Semi-auto Winding Machine for Pouch Cell

It is used for pouch cell winding, manually load the electrode, the winding will be completed automatically.

Semi-auto Stacking Machine for Pouch Cell Electrode Making

STC-BDP-SMC200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.

真空干燥箱50L-1.jpg

50L Compact Vacuum Drying Chamber Equipped with Inert Gas Valves for Lab

STC-KZK-502D is a compact vacuum drying oven equipped with inert gas valve widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions.The heating temperature max to 200℃ adjustable.

真空干燥箱90L-1.jpg

90L Vacuum Battery Electrode Drying Cabinet for Lab Battery R&D

STC-KZK-904 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.

行星球磨机2A-1.jpg

4x500ml Planetary Ball Milling Machine for Lab Pouch Cell Research

STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

四门圆筒真空烤箱-1.jpg

Four-door Circular Vacuum Oven for Battery Making

STC-KZK-4D is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.

行星搅拌机XJB-4-2.jpg

500ml Planetary Slurry Vacuum Mixer for Lab Pouch Cell Research

STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

干燥箱1.jpg

25L Vacuum Drying Oven for Lab Battery Material Drying

STC-KZK-252D is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 25L volume with two layers bracket.

涂膜机300-1.jpg

Compact Vacuum Tape Casting Machine for Lab Battery Research

STC-TM-300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.

鼓风干燥箱(1).jpg

Air-forced Drying Oven for Lab Research

STC-KGF-502 is a compact drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set. Air-forced circulation system can improve the temperature uniformity inside the chamber.

扣式波形弹片-2.jpg

Wave Spring for Coin Cell

Coin cell wave spring for lab battery material.

涂膜烘干机250-2.jpg

Compact Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck

STC-TMH-T300 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.

涂膜烘干机800-3.jpg

Large Vacuum Tape Casting Machine with Top Cover Heater for Pouch Battery Electrode Making

STC-TMH-T800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.

扣式垫片-2.jpg

Coin Cell Spacer

Coin cell spacer for lab battery material.

管式炉-1.jpg

Laboratory Tube Furnace for Lab Testing Samples Drying

This furnace provides the experiment environment of vacuum, atmosphere control and high temperature to enterprises laboratory, universities, research institutes, scientific research, research institutions, etc.

老款真空干燥箱-1.jpg

25L Compact Lab Vacuum Dry Oven with Digital Temperature Display

STC-KZK-252 is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is 25L volume with 2 layers bracket.

涂布机-2.jpg

Roll to Roll Coater Equipment for Lithium Pouch Cell Electrode

It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.

扣式壳盖2016-2.jpg

CR2016 Coin Cell Case

SUS 304 stainless steel coin cell case for cr2016

溶剂处理系统-1.jpg

NMP Filtration System for Battery Coating

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.

扣式壳盖2025-2.jpg

CR2025 Coin Cell Case

SUS 304 stainless steel cr2025 coin cell case

三门烤箱-1.jpg

3 Layers Vacuum Drying Chamber for Lab Research

The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.

扣式正盖-3.jpg

CR2032 Coin Cell Case

SUS 304 stainless steel coin cell case

箱式炉-2.jpg

Muffle Furance Box-type Drying Chamber for Lab Research

This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc. It is widely used for universities, research institutes, enterprise R&D centers, quality inspection units, processing industries, etc.

加热对辊机100-2.jpg

Heat Rolling Press Machine for Pouch Cell Fabrication

STC-DRG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

干燥箱1.jpg

Desktop Lab Vacuum Oven

STC-KZK-502 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set.

扣式锥形弹片-2.jpg

Conical Spring for Coin Cell

Coin cell conical spacer for lab battery material.

电动对辊机100-1.jpg

Lab Battery Electrode Rolling Press Machine with Digital Micrometer for Pouch Cell

STC-DDG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

老款真空干燥箱-1.jpg

50L Compact Vacuum Drying Oven for Laboratory

STC-KZK-502 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.

圆柱钢壳盖帽18650-1.jpg

18650 Cylindrical Battery Case

18650 Cylindrical cell stainless steel case

单节对面双工位-1.jpg

Double-sided 2 Work Stations Vacuum Glove Box for Lab Pouch Cell Making

STC-VGB-12D is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.

扣式正盖-3.jpg

CR2032 Coin Cell Case

SUS 304 stainless steel CR2032 coin cell case

真空干燥箱90L-1.jpg

90L Vacuum Battery Electrode Drying Cabinet for Lab Pouch Battery R&D

STC-KZK-904 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.

真空泵VSV-20-1.jpg

Vacuum Pump for Lab Vacuum Equipment

This vacuum pump is an oil sealed single-stage rotary vane pump, can be used to pump inactive gas within the scope of low vacuum and a small amount of non-condensable gas, Special suitable for packaging machinery, analytical instrument, laboratory and etc.

圆柱钢壳盖帽21700-1.jpg

21700 Cylindrical Battery Case

21700 Cylindrical cell stainless steel case

横切机300-1.jpg

Automatic Roll-to-Sheet Battery Electrode Cutting Machine

STC-BHQ-300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.

极耳-9.jpg

Nickel Plated Strip

Nickel planted strip for lab battery material

铜箔-1.jpg

Lab Battery Grade Copper Foil

Copper foil for battery material.

8 Channels 5V5A Battery Testing System for Pouch Cell

STC-4008Tn-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.

极耳-7.jpg

Aluminum Strip

Aluminum strip for lab battery material

铝箔-1.jpg

Lab Battery Grade Aluminum Foil

Aluminum foil for battery material.

铜网-1.jpg

Lab Battery Grade Copper Net

lab battery research material copper net

泡沫镍-1.jpg

Nickel Foam for Lab Battery Material

Nickel foam for battery material.

铝塑膜-1.jpg

Lab Battery Grade Aluminum Laminated Film

Aluminum laminated film for battery material.

杯式真空搅拌机-1.jpg

Lab Vacuum Slurry Mixing Machine for Battery Making

STC-EBJ-150 is a bench-top vacuum mixer with vacuum mixing and dispersion function, which is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It has a 150ml mixing container, other volume of mixing container is optional.

方形球磨机-1.jpg

20L Square-shape Planetary Ball Milling Machine

STC-XQM-20B planetary ball milling machine is widely used in many fields,like geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. Different material of milling jar is optional according to the milled material.

行星搅拌机XJB-4-1.jpg

150ml Compact Planetary Vacuum Mixer for Lab Battery Slurry Mixing

STC-EXJ-150 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

行星球磨机A4-3.jpg

12L Planetary Ball Milling Machine for Laboratory Lithium Battery Material Milling

STC-XQM-12A planetary ball milling machine is a laboratory multi-application powder material milling equipment, which is widely used in many fields, like geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc.

行星搅拌机XJB-4-2.jpg

500ml Planetary Vacuum Slurry Mixer for Lab Material Research

STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

球磨机-方形1.jpg

Square-shape Planetary Ball Milling Machine for Lab Material Grinding

STC-XQM-6B planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc.

浆料过滤装置-1.jpg

Lab Slurry Filtering Machine for Battery Material Fabrication

STC-EGL-500 filtering device is mainly used for sample testing in lab, which is applied in filtering various of hard particles whose size is no less than 124µm in slurry. Exquisite appearance, and convenient to operate.

行星球磨机2A-1.jpg

4x500ml Planetary Ball Milling Machine for Lab Research

STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

激光焊接机-1.jpg

1000W Industry Laser Welding Machine for 60138 Supercapacitor

It is used for 60138 Supercapacitor laser welding.

20200417172416505 (1).webp

Desktop Planetary Ball Mill with 4x100ml Milling Containers for Lab Material Grinding

STC-XQM-0.4A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.

测试仪10mA-1.jpg

8 Channels 5V10mA Battery Tester

STC-4008Tn-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

全自动卷绕机-1.jpg

Super Capacitor Automatic Winding Machine

It is a fully automatic winding machine for lithium batteries supercapacitor, which is with the function of monitoring winding length and diameter. It is capable to carry out chamfer, hole punching, short circuit testing, it features stable working status and technology guarantee.

浆料供料系统-1.jpg

Lab Compact Battery Slurry Feeding System

This slurry feeding system is used for battery electrode coating Slurry feeding, and also can be applied in others slurry feeding. It has exquisite appearance, equips with two pumps and cache tanks for cathode & anode slurry feeding for high efficiency operation.

球磨机2G-1.jpg

Planetary Ball Mill for Glove Box Use

STC-XQM-0.2A is a supper mini model of vertical planetary ball mill, which is specially designed to be used for grinding materials under vacuum or inert gas atmosphere conditions inside the glove box. The split design makes it convenient to use inside of glovebox, it can effectively avoid the operating buttons being obscured when the lid is open.

测试仪50mA-1.jpg

8 Channels 5V50mA Battery Testing Equipment

STC-4008Tn-5V50mA is a 8 channels battery testing system used for coin cell testing from 5uA~50mA, up to 5V. It is three range, 5uA~1mA,1mA~25mA,25mA~50mA.It is a reliable device for universites.

电容器烤箱-1.jpg

Supercapacitor Vacuum Drying Oven

It is mainly used for vacuum drying, nitrogen filling and cyclic baking of batteries and supercapacitors. The product is kept in an anhydrous and oxygen-free environment and transferred into the glove box for liquid injection.

浆料供料系统5L-1.jpg

Slurry Feeding Machine for Battery Electrode Coating

STC-ESL-5L slurry feeding system is mainly used for slurry feeding when battery electrode coating, and also can be applied in other slurry feeding.

浆料除铁机-1.jpg

Battery Slurry Iron Removing & Filtting Machine for Battery Fabrication

This machine is used for battery slurry iron removing and filtering.

高速震动球磨机-1.jpg

Micro Vibration Ball Milling Machine for Lab Material Grinding

STC-XQM-VB Micro vibration ball milling machine is a high-power micro vibration ball milling and material mixing machine, which is suitable for small batch material ball milling and mixing of small amounts of substances. It used 2 ml disposable screw microtubes, and mixing of 3 samples can be performed simultaneously (usually can be performed within 45s)

电容器连续整形机-1.jpg

Supercapacitor Forming Machine

It is mainly used to trim and align the cells of batteries and supercapacitors and compact the end faces of negative poles, to facilitate laser welding the upper and lower current collectors.

电池测试仪-1.jpg

80 Channels 5V6A Battery Testing Equipment

STC-4008Tn-5V6A is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

搅拌机5L-2.jpg

5L Planetary Slurry Vacuum Mixer for Lab Pilot Line

STC-EXJ-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.

振筛机UZS-300-1.jpg

Lab Vibration Machine with 6 Layers Sieves for Battery Macking Making

This machine is a standard analytical sieve that integtrates powder classification and liquid filtration; it is suitable for laboratories and quality inspection rooms for accurate analysis of particle size structure of particles and ppowders, liquid solids content and sundries content testing analysis.

行星球磨机4A-1.jpg

Planetary Ball Miller for Lab Research with 4x500ml Milling Container

STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

测试仪 5V12A-1.jpg

8 Channels 5V6A Battery Testing Equipment

STC-4008Tn-5V6A is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

电容器滚槽封口机-3.jpg

Super Capacitor Grooving & Pre-sealing Machine

It is suitable for grooving, pre-sealing and crimping of supercapacitor cases.

测试仪 5V12A-1.jpg

5V12A 8 Channels Battery Testing Equipment

STC-4008Tn-5V12A is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

电容器入壳机-1.jpg

Supercapacitor Cell to Case Insert Machine

It is used to press supercapacitors (after the welded cell is assembled with O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.

5V5A 8 Channels Battery Testing System

STC-4008Tn-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.

电容器注液机-1.jpg

Supercapacitor Electrolyte Injecting Machine

It is suitable for supercapacitor injection by means of vacuuming, injection and pressurization, which features high consistency, reliability and safety of electrolyte absorption.

内阻测试仪BTS-100-1.jpg

Battery Internal Resistance Testing Machine for Lab Research

Internal resistance testing machine is mainly used for testing the internal resistance and voltage of various batteries, with the features of small size, light weight, exquisite appearance, stabile performance and easy to carry.

电容器二封机-5.jpg

Super Capacitor Secondary Sealing Machine

It is suitable for secondary molding, sealing and crimping of battery and supercapacitor cases.

十挡分选机18650-1.jpg

10 Channels Cylindrical Battery Grading & Sorting Equipment for Production Line

Cylindrical cell sorting machine is applied in battery grade sorting by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.

五挡分选机18650-1.jpg

5 Channels 18650 Cylindrical Battery Sorting Machine for Production Line

18650 Cylindrical cell sorting machine is used for sorting 18650 battery grade by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.

极耳铆钉机MY130-1.jpg

Ox-horn Supercapacitor Manual Riveting Machine

It is used for super capacitor riveting. It is manual operation, small size, a perfect decide for super capacitor lab research.

电容器滚槽机-2.jpg

Ox-horn Supercapacitor Semi-auto Grooving Machine

STC-SGC-OX is TICO TECHNOLOGY's new generation of cylindrical cell grooving machine, it is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650, 26650, 21700, and other cylindrical cells.

极耳刺孔机-1.jpg

Ox-horn Supercapacitor Hole Punching Machine

STC-SCK-OX is used for ox-horn supercapacitor core and pole ear punching. Different size of punching die is optional, easy to replace die.

电池测试仪100V20A-1.jpg

100V30A Battery Testing System

100V30A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.

卷绕机14010YZD-1.jpg

Semi-auto Winding Machine for Supercapacitor

It is used for cylindrical cell winding. Manually load the electrode to the winding part, winding with separator, the tape sticking and unloading will be finished automatically.

压片机60T-1.jpg

60T Hydraulic Tablet Pressing Machine for Powder into Piece

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

单节对面双工位-1.jpg

Double-sided 2 Work Stations Vacuum Glove Box for Lab

STC-VGB-12D is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.

电池测试仪100V20A-1.jpg

100V20A Battery Testing Equipment

100V20A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.

电容器滚槽机-1.jpg

Semi-auto Grooving Machine

It is used for supercapacitor case grooving.

压片机40T-1.jpg

40 Ton Lab Manual Hydraulic Tablet Pressing Equipment for Powder into Pellet Making

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

三节快掀手套箱-1.jpg

3 Part Quick to Open Vacuum Glove Box for Battery Polit line

STC-VGB-33S vacuum glove box is used for battery pilot line, and factory production. It is a quick to open vacuum glove chamber with three seactions. This machine is an ideal equipment for battery pilot line and factory production.

电容器封口机-1.jpg

Supercapacitor Sealing Machine

It is used for supercapacitor case sealing.

压片机30T-1.jpg

Lab Compact Manual Hydraulic Tablet Press Machine for Coin Cell Machine

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

四面涂膜器-3.jpg

4 Paths Film Applicator with Fixed Thickness

It is fixed thickness precision film applicator with four paths for lab small qty coating, various of models can be optional.

TMQ100可调-1.jpg

100mm Width Micrometer Adjustable Doctor Blade

It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.

TMQ150固定-1.jpg

150mm Width Fixed Film Coating Applicator for Lab Research

It is a fixed thickness precision film applicator for lab small qty coating, various of models can be optional.

数显涂膜器 150可调-1.jpg

Digital Micrometer Film Applicator

Widely used for various coating researches in lab, like battery electrode, ceramic film, crystalline film, nano film, etc.

单节单工位手套箱.jpg

Internet of Things Vacuum Glovebox with Gas Purification System H2O & O2 < 1ppm

STC-VGB-11S is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.

TMQ100固定-1.jpg

100mm Width Micrometer Film Applicator for Lab Coating Research

It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.

单工位注液机-1.jpg

Supercapacitor Electrolyte Filling Machine

It is used for supercapacitor electrolyte filling. Vacuuming filling and pressurization working process is used, which features high consistency, reliability and safety of electrolyte absorption.

压片机15T-3.jpg

15 Ton Lab Single Punch Hydraulic Pressing Machine for KBr Sample Pressing Equipment

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

单节双工位手套箱.jpg

Single-sided Double Stations Vacuum Glove Box for Battery Research

STC-VGB-12S is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.

TMQ150可调-1.jpg

150mm Width Adjustable Film Coating Applicator for Lab Research

It is a compact device for various of coating research for lab,especially for battery electrode coating,ceramic coating ,nano film,etc.The coating width can be adjusted.

电芯整形机-1.jpg

Supercapacitor Forming Machine

It is used supercapacitor cell core forming to makes positive and negative end surface compact, facilitate the upper and lower current collector laser welding.

压片机24T-1.jpg

Lab Bench-top Drying Powder Tablet Hydraulic Punching Equipment for Preparing Compound Samples

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

TMQ250可调-1.jpg

250mm Width Adjustable Film Coating Applicator for Lab Research

It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc. The coating width can be adjusted.

电容器二封机-1.jpg

Supercapacitor Secondary Press Sealing Machine

It is used supercapacitor case secondary pressing sealing.

压片机15T-1.jpg

15T Laboratory Single Punch Hydraulic Pressing Machine for Tablet Press

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

手套箱两节双工位-1.jpg

IOT Two-part Double Work Stations Vacuum Glovebox

STC-VGB-22S is an internet of things vacuum glovebox, centralized equipment management intelligent analysis & early warning of equipment status, the abnormal alarm message is actively sent, remote fault diagnosis and online debugging.

入壳机-1.jpg

Supercapacitor Cell to Case Insert Machine

It is used to press supercapacitors (after the welded cell is assembled with the O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.

压片机12T-3.jpg

12 Ton Lab Dry Powder Hydraulic Pressing Machine

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

小电容器旋压封口机XF20-1.jpg

Ox-horn Supercapacitor Sealing Machine

It is used for small Ox-horn supercapacitor aluminum can automatic spinning pressing sealing machine.

压片机5T-1.jpg

5 Ton Lab Hydraulic KBr Sample Pressing Machine for Pellet Press

Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.

电容器二封机-6.jpg

New-dedigned Supercapacitor Battery Secondary Crimping Machine

It is suitable for secondary molding, sealing and crimping of battery and supercapacitor cases.

模切机-1.jpg

Semi-auto Pouch Cell Electrode Die Cutting Machine for Lab Research

STC-BMQ-SM280 semi-auto electrode die cutter is a necessary equipment for pouch cell preparation, it is used for pouch cell electrode cutting to produce specific shapes of cathode and anode with current collector tab.

冲壳机-1.jpg

Semi-auto Pouch Cell Cup Punching Machine for Polymer Battery Research

STC-BCK-SM200 semi-auto case /cup forming machine is used for prepare pouch cell case made of aluminum-laminated films.IR sensor, dual start buttons and protection cover are included for safety operation.

叠片机-A-1.jpg

Battery Electrode Stacking Machine for Lab Pouch Cell Research

STC-BDA200-1 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.

热整平机-1.jpg

Pouch Cell Hot Flat Press Machine for Lab Battery Research

STC-BRY-200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking, winding to make it easy to put into aluminum-laminated case and pouch cell formation.

软包电池顶侧封-1.jpg

Lab Polymer Pouch Cell Case Top & Side Edges Hot Sealing Machine

STC-BRF-G200 is a pouch cell aluminum-laminated case edges hot sealing with tab machine before electrolyte filling process. The temp of upper and lower sealing head can be controlled separately and settable.

预封机-1.jpg

Vacuum Pre-sealing Machine for Pouch Cell Making

STC-BYF-200 is used for pouch cell aluminum-laminated case vacuum pre-sealing after battery liquid filling into cell.

二封机-1.jpg

Compact Pouch Cell Secondary Sealing Machine for Lab Battery Research

STC-BEF-200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation.

静置箱软包-1.jpg

Vacuum Electrolyte Diffusion Chamber for Pouch Cell Lab Research

STC-BJZ-300 is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to pouch cell.

20210519153809186.jpg@!jw1600

Supercapacitor Manual Riveting Machine

STC-SMJ-OX is a manual riveting machine which is used for supercapacitor cap and tab riveting .

20210519142621412.jpg@!jw1600

Super Capacitor Tab Hole Punching Machine

STC-SCK-OX punching machine is used for ox-horn super capacitor tab hole punching

球磨机2G-1.jpg

Mini Lab Vertical Planetary Ball Mill with 4x50ml Ports Grinding

STC-XQM-0.2A planetary ball mill is widely used for geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine.It is with 4pcs 50ml milling jars. Milling speed, time and mode can be set according to different experiment requirement.

瓶口数字滴定器50ml-1.jpg

Bottle Top Burettes Titreet for Cylindrical Battery Electrolyte Filling

It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.

电容器滚槽封口机-1.jpg

Pin-supercapacitor Grooving & Crimping Machine

This equipment is used for pin supercapacitor aluminum case grooving and crimping. It is a multi-functional device which is compact size, high efficiency for small size supercapacitor research.

静置箱圆柱-1.jpg

Vacuum Electrolyte Diffusion Equipment for Lab Cylindrical Cell Fabrication

STC-BJZ-300 is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to cylindrical cell.

20200417172416505 (1).webp

Lab Planetary Ball Miller with 4x100ml Grinding Containers for Coin Cell

STC-XQM-0.4A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.

电动对辊机100-1.jpg

4'' Width Electric Roll Press Machine for Battery Electrode Pressing

STC-DDG-100 is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.

扣式电动封口机-2.jpg

Touch Screen Controlled Electric Crimper for Coin Cell Research

STC-ADF-20 is a compact electric crimper for CR2016,CR2025,CR2032, the other crimping die set can be optional. It is touch screen controlled with high automation. Stainless steel crimping die, anti-corrosion and durable.

滚槽机-1.jpg

Laboratory Cylindrical Battery Case Grooving Machine for 18650 21700 26650 Cylinder Battery

STC-CGC-SM18 semi-auto cylindrical cell case grooving machine, which is mainly used in laboratory for 18650, 21700, 26650, 32650 cylindrical cell grooving.

涂膜烘干机TMHD800-1.jpg

800mm Film Coating Machine with Bottom Heater

STC-TMH-B800 is a compact tape casting film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

分条机B-1.jpg

350mm Width Battery Electrode Slitting Machine for Cylindrical Battery Making

STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

20200417163556385.webp

Compact Slurry Vacuum Mixer for Lab Research

STC-EBJ-150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble.It is with 150ml mixing container, other volume of mixing container is optional.

Battery Electrode Rolling Press Machine with Digital Micrometer

STC-DDG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

切片机-2.jpg

Coin Cell Electrode Cutting Machine for Laboratory Research

STC- PT-10 is a coin cell disc cutter for electrode precision cutting, which can be easily placed into a glovebox.

涂膜机-1.jpg

Lab Battery Tape Casting Machine for Laboratory Battery Rsearch

STC-TM-300 is a compact tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

分条机B-1.jpg

350mm Width Battery Electrode Slitting Machine

STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

1KW 圆柱电池超声波点焊机带极耳送料装置.png

Cylindrical Cell Ultrasonic Welder with Tab Feeding Mechanism

The machine integrates ultrasonic welding and automatic tab feeding function, enhancing the efficiency and precision of the battery production. The equipment mainly consists of ultrasonic generator, transducer, upper and lower horn, pneumatic parts, frame and so on. The upper and lower horns are made of new alloy materials with good abrasion resistance.

分体式涂布机-21(1).jpg

Lab Transfer Lithium-ion Battery Electrode Coater

The Intermittent coating machine is a three-roller transfer coating equipment, which can be used for continuous coating and intermittent coating. It is convenient to apply for coating on various substrates, especially used for lithium-ion battery industry.

搅拌机10L.png

10L Planetary Vacuum Lithium-ion Battery Slurry Mixing Machine

The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.

搅拌机5L-1.jpg

5L Lab Planetary Vacuum Mixer and Dispersing Machine

The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.The maximum volume of the equipment is 5L.