Coin Cell Lab Machine
Pouch Cell Lab Machine
Cylindrical Cell Lab Machine
Ball Milling
Mixer
Film Coating
Roll Press
Electrode Cutting
Battery Testing Equipment
Oven
Glove Box
Super Capacitor Machine
Material

Address: 3F,Bldg 6,Haihai Da Tianliao

Technology Park,Yutang Subdistrict,

Guangming ,Shenzhen ,China

*Your Name (required)
*Your Email (required)
Phone (required)
*Your Message (required)

Coin Cell Disassembling Machine for Battery Research


The STC-CX20 compact hydraulic disassembling machine used for all types of coin cell cases disassembling, such as CR2032, CR2450, etc. CR20xx series disassembling die is included as standard, the other die set is optional. Coin cell crimping die can be optional and easy to replace.

Product Details



Similar Product

电池测试仪-1.jpg

80 Channels 5V6A Battery Testing Equipment

STC-40080-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

20210519153809186.jpg@!jw1600

Supercapacitor Manual Riveting Machine

STC-NMJ30 is a manual riveting machine which is used for supercapacitor cap and tab riveting .

20210519142621412.jpg@!jw1600

Super Capacitor Tab Hole Punching Machine

STC-NCK30 punching machine is used for ox-horn super capacitor tab hole punching

电容器滚槽封口机-1.jpg

Pin-supercapacitor Grooving & Crimping Machine

This equipment is used for pin supercapacitor aluminum case grooving and crimping. It is a multi-functional device which is compact size, high efficiency for small size supercapacitor research.

电动对辊机100-1.jpg

100mm Width Hot Rolling Press Machine for Battery Research

STC-JS100 is a compact electric hot roll press used for battery electrode pressing, max temperature to 120℃ adjustable. The pressing gap and pressing speed is adjustable. It is compact size perfect for battery research.

Manual Hydraulic Cylindrical Cell Crimping Machine for Lab Battery

The STC-YSF65 is a compact hydraulic crimping machine for all types of cylindrical cell crimping for battery labs, such as 18650,26650,21700,AA,AAA,etc. Small size allow it to be put into glove box through big antechamber.

新棟力超声焊机1KW-2.jpg

1000W Ultrasonic Mental Spot Welding Machine for Aluminum &Copper Foil

STC-CSH1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.

涂膜烘干机-1(L).jpg

Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck

STC-TMH250 is a compact film tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.

扣式手动冲片机-2.jpg

Coin Cell Electrode Punching Machine for Button Cell Fabrication

STC-CP60 disc cutter is used for coin cell precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

行星搅拌机XJB-4-2.jpg

500ml Planetary Vacuum Slurry Mixer for Lab Material Research

STC-XJB500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

行星球磨机2A-1.jpg

4x500ml Planetary Ball Milling Machine for Lab Research

STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

分条机 FT300-1.jpg

Desktop Semi-auto Battery Electrode Slitting Machine

STC-BFT300 is a semi-auto slitting machine for battery electrode for battery research. The slitting width can be made according to requirement.

涂膜机300-3.jpg

Compact Vacuum Tape Casting Machine for Battery Laboratory

STC-TM300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.

滚槽机-3.jpg

New Design Cylindrical Cell Grooving Machine for Lithium Battery Making

STC-ZG650 is TICO TECHNOLOGY new product. It is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650,26650,21700,and other cylindrical cells.

扣式手动封口机-3.jpg

Manual Hydraulic Crimper for CR20xx Series Coin Cell Cases

The STC-SF120 compact hydraulic crimping machine is used for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20xx series crimping die is included as standard, the other crimping die set is optional. Coin cell disassembly die and tablet pressing die can be optional.

加热对辊机100-2.jpg

100mm Width Hot Calender for Lab Battery Research

STC-JS100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

叠片机A-3.jpg

TICO New Design Semi-auto Electrode Stacking Machine

STC-SDP200 is a new designed semi-auto electrode stacking machine, which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch cell core.

浆料供料系统5L-1.jpg

Slurry Feeding Machine for Battery Electrode Coating

STC-JG5L slurry feeding system is mainly used for slurry feeding when battery electrode coating, and also can be applied in other slurry feeding.

分条机B-1.jpg

350mm Width Battery Electrode Slitting Machine

STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

行星球磨机4A-1.jpg

Planetary Ball Miller for Lab Research with 4x500ml Milling Container

STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

横切机300-1.jpg

Automatic Roll-to-Sheet Battery Electrode Cutting Machine

STC-RHQ300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.

电动对辊机100-1.jpg

4'' Width Electric Roll Press Machine for Battery Electrode Pressing

STC-DG100 is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.

预封机200-1.jpg

Lab Vacuum Pre-sealing Equipment for Pouch Cell Preparation

STC-YF200 is a laminated-aluminum case/cup hot sealing equipment for polymer pouch cell pre-sealing after the battery electrolyte injection into the cell.

单针点焊机-1.jpg

Pneumatic Cylindrical Cell Spot Welding Machine for Lab Research

This product is the enormously popular AC pluse tab welder, controlled by single chip microcomputer. Its capability is more stable and reliable. It is designed for producing high standard NiCr, Ni-Mh, Li batteries, used for welding cylinder cell negative terminal and tab (single pin welding).

涂布机-2.jpg

Transfer Roll to Roll Film Coating Machine for Lithium Battery Electrode

This machine a three roller transfer coating equipment, which can be used for continuous coating and intermittent electrode coating, and it is convenient to apply for surface coating for various substrates. Especially used in the lithium ion battery electrode coating.

浆料过滤装置-1.jpg

Lab Slurry Filtering Machine for Battery Material Fabrication

STC-FT500ml filtering device is mainly used for sample testing in lab, which is applied in filtering various of hard particles whose size is no less than 124µm in slurry. Exquisite appearance, and convenient to operate.

球磨机-方形1.jpg

Square-shape Planetary Ball Milling Machine for Lab Material Grinding

STC-FQM-6L planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc.

扣式手动拆卸模-1.jpg

Decrimping Die for Coin Cell CR20xx Series

This is the coin cell decrimping die for CR20xx series, and it is made of stainless steel naterial.

涂布机-1.jpg

Roll to Roll Coater Equipment for Lithium Cylindrical Cell Electrode

It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.

电动对辊机100-1.jpg

4'' Width Electric Roll Press Machine for Coin Cell Electrode Calendering

STC-DG100L is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.

热封机330-2.jpg

400mm Width Pouch Cell Hot Sealer for Aluminum-laminated Film Battery Cup

STC-SFZ400 is used for Polymer pouch cell aluminum laminated cup top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.

涂布机-2.jpg

Roll to Roll Coater Equipment for Lithium Pouch Cell Electrode

It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.

涂膜烘干机250-1.jpg

Automatic Vacuum Tape Casting Machine with Heating Cover & Vacuum Chuck

STC-TMH250 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.

连续分条机-1.jpg

Roll to Roll Continuous Cylindrical Cell Electrode Slitting Machine

It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.

二封机200-1.jpg

Pouch Cell Final Vacuum Sealing Machine with Auto Piercing Function

STC-BFZ200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing.

涂膜烘干机800-2.jpg

Large Vacuum Tape Casting Machine with Top Cover Heater for Cylindrical Battery Electrode

STC-TM800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.

20200417172416505 (1).webp

Lab Planetary Ball Miller with 4x100ml Grinding Containers for Coin Cell

STC-XQM0.4R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.

扣式电动封口机-2.jpg

Touch Screen Controlled Electric Crimper for Coin Cell Research

STC-DF160 is a compact electric crimper for CR2016,CR2025,CR2032, the other crimping die set can be optional. It is touch screen controlled with high automation. Stainless steel crimping die, anti-corrosion and durable.

静置箱300-2.jpg

Electrolyte Vacuum Diffusion Machine for Polymer Pouch Battery

STC-JZX300 is mainly used for absorbing the electrolyte and making it mix with electrode more completely under the condition of vacuum after injecting electrolyte to punch cell and cylindrical cell. The whole equipment is made of high-quality electronic component and materials.

搅拌机5L-1.jpg

5L Planetary Vacuum Slurry Mixing Machine for Cylindrical Cell Making

STC-XJB-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.

扣式气动封口机-1.jpg

Gas Driven Crimping Machine for CR20xx Series Coin Cell Assembly

The STC-QF20 is a compact gas driven crimping machine for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20XX series crimping die is included as standard, the other crimping die set is optional. It is perfect to be used inside of glovebox from big antechamber, no leakage.

冲壳机200-1.jpg

Semi-auto Pouch Cell Case Punching & Forming Machine

STC-CK200 semi-auto pouch cell case punching machine is used for aluminum-laminated case forming. IR sensor, double start buttons and visual protection cover for safety operation.

四门圆筒真空烤箱-1.jpg

Four-door Circular Vacuum Oven for Cylindrical Cell

STC-YKX4 is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.

模切机-1.jpg

Semi-auto Pouch Cell Electrode Die Cutter for Lab Battery Making

STC-MQ280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.

卷绕机7508YZ-1.jpg

Semi-auto Winding Machine for Cylindrical Cell

It is used for cylindrical cell winding, manually load the electrode,the winding will be completed automatically.

杯式真空搅拌机-1.jpg

Compact Slurry Vacuum Mixer for Coin Cell Research

STC-ZJB150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It is with 150ml mixing container, other volume of mixing container is optional.

分条机B-1.jpg

350mm Width Battery Electrode Slitting Machine for Cylindrical Battery Making

STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

扣式手动冲片机-3.jpg

Compact Disc Cutter for Coin Cell Separator Making

STC-CP60 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

浆料除铁机-1.jpg

Battery Slurry Iron Removing & Filtting Machine for Battery Fabrication

This machine is used for battery slurry iron removing and filtering.

高速震动球磨机-1.jpg

Micro Vibration Ball Milling Machine for Lab Material Grinding

STC-WQM1 Micro vibration ball milling machine is a high-power micro vibration ball milling and material mixing machine, which is suitable for small batch material ball milling and mixing of small amounts of substances. It used 2 ml disposable screw microtubes, and mixing of 3 samples can be performed simultaneously (usually can be performed within 45s)

涂布机3箱-1.jpg

Continuous Roll to Roll Transfer Film Coating Machine with Three Parts of Drying Chamber for Battery Polit Line

STC-RTCA300-3JF is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.

手动立式对辊机-1(L).jpg

Manual Calendering Equipment for Battery Electrode Making

STC-SG150L manual calendering equipment is used for battery electrode making after coating and drying. It is a bench-top, manual operation with a 150mm width roller, easy to operation.

行星球磨机2A-1.jpg

4x500ml Planetary Ball Milling Machine for Lab Pouch Cell Research

STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

气动模切机85-3.jpg

Compact Gas Driven Electrode Die Cutter for Pouch Cell Research

STC-QMQ85 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.

行星搅拌机XJB-4-1.jpg

150ml Compact Planetary Vacuum Mixer for Lab Battery Slurry Mixing

STC-XJB150 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

球磨机2G-1.jpg

Planetary Ball Mill for Glove Box Use

STC-XQM0.2G is a supper mini model of vertical planetary ball mill, which is specially designed to be used for grinding materials under vacuum or inert gas atmosphere conditions inside the glove box. It is split design, the ball mill is put into glovebox, the controller is used outside glove box.

圆柱气动封口机-1.jpg

Cylindrical Cell Gas Driven Crimping Machine for Battery Research

The STC-YQF65 is a compact gas driven crimping machine for all types of cylindrical cell crimping, such as 18650,26650,AA,AAA, etc. It is perfect to use it into glove box without leakage.

液压对辊机DG300-2.jpg

Roll to Roll Hydraulic Calendaring Machine with Winding & Unwinding Device

STC-HDG300 is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.

挤压式涂布机3箱-1.jpg

Slot Die Roll to Roll Electrode Film Coating Machine

This machine is applied in Lithium-ion battery electrode coating process of cathode & anode. The slot extrusion coating die is used for non-contact coating to substrate, which can realize the continuous, intermittence, stripe film coating and etc.

模切机280-1.jpg

Semi-auto Battery Electrode Die Cutter for Pouch Cell Research

STC-MQ280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.

涂膜机300-2.jpg

Compact Vacuum Tape Casting Machine for Coin Cell Making

STC-TM300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.

行星搅拌机XJB-4-2.jpg

500ml Planetary Slurry Vacuum Mixer for Lab Pouch Cell Research

STC-XJB500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

20200417172416505 (1).webp

Desktop Planetary Ball Mill with 4x100ml Milling Containers for Lab Material Grinding

STC-XQM0.4R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.

溶剂处理系统-1.jpg

NMP Filtration System for Battery Coating

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.

涂布机2箱-1.jpg

Continuous Roll to Roll Transfer Film Coating Machine with Two Parts of Drying Chamber for Battery Polit Line

STC-RTCA300-2JF is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.

注液泵ZYB-01-1.jpg

Lab Filling Pump Device for Cylindrical Battery Electrolyte Injection

It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.

单节单工位手套箱.jpg

Internet of Things Vacuum Glovebox with Gas Purification System H2O & O2 < 1ppm

STC-VGB-11 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.

扣式手动冲片机-3.jpg

Compact Disc Cutter for Coin Cell Separameter Making

STC-CP60 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

杯式真空搅拌机-1.jpg

Lab Vacuum Slurry Mixing Machine for Battery Making

STC-ZJB150 is a bench-top vacuum mixer with vacuum mixing and dispersion function, which is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It has a 150ml mixing container, other volume of mixing container is optional.

液压对辊机DG300-1.jpg

Continuous Hydraulic Calendaring Machine for Battery Electrode Fabrication

STC-HDG300 is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.

涂膜烘干机800-3.jpg

Large Vacuum Tape Casting Machine with Top Cover Heater for Pouch Battery Electrode Making

STC-TM800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.

圆柱卷绕机JR90-1.jpg

Cylindrical Cell Manual Winding Machine

STC-YSJ65 is a compact desktop manual winding machine for winding cylindrical cell electrode & separator to make a battery cell core. The winding speed is adjustable.

扣式电动冲片机-1.jpg

Automatic Coin Cell Electrode Cutting Machine

It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.

球磨机2G-1.jpg

Mini Lab Vertical Planetary Ball Mill with 4x50ml Ports Grinding

STC-XQM0.2R planetary ball mill is widely used for geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine.It is with 4pcs 50ml milling jars. Milling speed, time and mode can be set according to different experiment requirement.

加热对辊机100-2.jpg

Heat Rolling Press Machine for Pouch Cell Fabrication

STC-JS100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

新棟力超声焊机1KW-2.jpg

Ultrasonic Welding Machine for Battery Lab Research

STC-CSH1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.

扣式手动拆卸机-3.jpg

Coin Cell Disassembling Machine for Battery Research

The STC-CX20 compact hydraulic disassembling machine used for all types of coin cell cases disassembling, such as CR2032, CR2450, etc. CR20xx series disassembling die is included as standard, the other die set is optional. Coin cell crimping die can be optional and easy to replace.

半自动卷绕机JR90-2.jpg

Pouch Cell Manual Winding Machine

STC-FSJ90 is a compact desktop manual winding machine for winding pouch cell electrode & separator to make a battery cell core. With optional cylindrical cell winding die, it can be used for cylindrical cell winding.

加热对辊机100-2.jpg

Heat Rolling Press Machine for Cylindrical Cell Research

STC-JS100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

气动模切机85-3.jpg

Compact Gas Driven Electrode Die Cutter for Pouch Cell Research

STC-QMQ85 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.

分条机 FT300-2.jpg

Desktop Semi-auto Battery Electrode Slitting Machine for Cylindrical Cell

STC-BFT300 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.

老款真空干燥箱-1.jpg

50L Compact Vacuum Drying Oven for Coin Cell Research

STC-ZKX50 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.

预封静置侧封-1.jpg

3-in-1 Hot Sealer for Edge & Vacuum Sealing & Vacuum Standing Equipment for Pouch Cell R&D

It is a 3 in 1 machine for pouch cell research. It can be compatible with the following functions. Pouch cell top & side heat sealing before electrolyte injection. Pouch cell vacuum standing for electrolyte diffusion, different parameter can be saved. Pouch cell vacuum hot sealing.

切片机-2.jpg

Coin Cell Electrode Cutting Machine for Laboratory Research

STC- PT-10 is a coin cell disc cutter for electrode precision cutting, which can be easily placed into a glovebox.

行星搅拌机XJB-4-2.jpg

500ml Planetary Slurry Vacuum Mixer for Lab Cylindrical Cell Research

STC-XJB500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.

手动模切机-1.jpg

Compact Manual Hydraulic Die Cutting Machine for Pouch Cell

It is used for battery electrode die cutting for pouch cell cathode & anode. Compact size can be put inside glove box.

测试仪10mA-1.jpg

8 Channels 5V10mA Battery Tester for Coin Cell Lab Research

CT-4008-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

行星球磨机4A-1.jpg

4x500ml Planetary Ball Miller for Cylindrical Cell Lab Research

STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

手持冲片机-3.jpg

Hand-held Coin Cell Disc Cutter for Electrode Making

STC-SCQ-YP is a hand-held manual disc cutter for cutting round discs, different diameter is optional. It is widely used for battery electrode cutting, foil material cutting, sampling, etc.

行星球磨机A4-3.jpg

4x500ml Planetary Ball Miller for Lab Pouch Cell Research

STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.

搅拌机5L-2.jpg

5L Planetary Slurry Vacuum Mixer for Lab Pilot Line

STC-XJB-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.

卧式对辊机-1.jpg

Horizonal Manual Rolling Press Machine for Laboratory Research

STC-HSG100 is a hand operation batteryelectrode rolling press machine after coating and drying. It is bench-top and compact dimension, 100mm width roller, and easy for operation.

瓶口数字滴定器50ml-1.jpg

Bottle Top Burettes Titreet for Cylindrical Battery Electrolyte Filling

It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.

涂膜烘干机800-1.jpg

Large Vacuum Tape Casting Machine with Top Cover Heater for Battery Electrode

STC-TMH800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.

扣式电动冲片机-1.jpg

Automatic Coin Cell Electrode Punching Machine

It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.

方形球磨机-1.jpg

20L Square-shape Planetary Ball Milling Machine

STC-XQM20 planetary ball milling machine is widely used in many fields,like geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. Different material of milling jar is optional according to the milled material.

四面涂膜器-3.jpg

4 Paths Film Applicator with Fixed Thickness

It is fixed thickness precision film applicator with four paths for lab small qty coating, various of models can be optional.

测试仪50mA-1.jpg

8 Channels 5V10mA Battery Analyzer System for Lab Coin Cell Research

STC-4008-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

涂膜烘干机250-2.jpg

Compact Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck

STC-TMH250 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.

单节双工位手套箱.jpg

Single-sided Double Stations Vacuum Glove Box for Cylindrial Cell Battery Research

STC-VGB-L12 is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.

手动模切机-5.jpg

Compact Hydraulic Die Cutting Machine

It is used for battery electrode die cutting for pouch cell cathode&anode. Compact size can be put inside glove box.

浆料供料系统-1.jpg

Lab Compact Battery Slurry Feeding System

This slurry feeding system is used for battery electrode coating Slurry feeding, and also can be applied in others slurry feeding. It has exquisite appearance, equips with two pumps and cache tanks for cathode & anode slurry feeding for high efficiency operation.

20200417163556385.webp

Compact Slurry Vacuum Mixer for Lab Research

STC-ZJB150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble.It is with 150ml mixing container, other volume of mixing container is optional.

扣式手动封口模-1.jpg

Coin Cell Crimping Die for CR20xx Series

This is the coin cell crimping die for CR20xx series, and it is made of stainless steel naterial.

圆柱电池拆卸机-1.jpg

Cylindrical Cell Case Disassembly Machine for Performance Testing

It is mainly used for cylindrical cell case disassembly after the cell case crimping, in order to test the battery performance. Different die can be equipped for various size cylindrical cell.

溶剂处理系统-1.jpg

NMP Filtration System for Battery Coating

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.

电动对辊机100-1.jpg

Lab Battery Electrode Rolling Press Machine with Digital Micrometer for Pouch Cell

STC-DCM100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

连续分条机-1.jpg

Roll to Roll Continuous Slitting Machine for Battery Electrode Making

It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.

叠片机-A-1.jpg

Battery Electrode Stacking Machine for Lab Pouch Cell Research

STC-SDP200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.

静置箱圆柱-1.jpg

Vacuum Electrolyte Diffusion Equipment for Lab Cylindrical Cell Fabrication

STC-JZX300L is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to cylindrical cell.

振筛机UZS-300-1.jpg

Lab Vibration Machine with 6 Layers Sieves for Battery Macking Making

This machine is a standard analytical sieve that integtrates powder classification and liquid filtration; it is suitable for laboratories and quality inspection rooms for accurate analysis of particle size structure of particles and ppowders, liquid solids content and sundries content testing analysis.

预封静置侧封-1.jpg

2-in-1 Vacuum Standing & Hot Pre-sealing Equipment for Lab Polymer Cell Research

STC-JY200 is a 2-in-1 machine for pouch cell research. The key feature of this machine is compatible with the following two functions. Vacuum standing for electrolyte diffusion after electrolyte filling and hot sealing for pouch cell first sealing.

滚槽机-1.jpg

Laboratory Cylindrical Battery Case Grooving Machine for 18650 21700 26650 Cylinder Battery

STC-GC650L semi-auto cylindrical cell case grooving machine, which is mainly used in laboratory for 18650, 21700, 26650, 32650 cylindrical cell grooving.

气动冲壳机-1.jpg

Gas Driven Pouch Cell Case Forming Machine for Pouch Cell Preparation

STC-QCK65 is a gas driven machine for aluminum-laminated film pouch cell case forming.The case punching depth can be adjustable.

测试仪 5V12A-1.jpg

5V12A 8 Channels Battery Testing Equipment for Cylindrical Cell

STC-4008-5V12A-TB-F is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

Battery Electrode Rolling Press Machine with Digital Micrometer

STC-DCM100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.

瓶口数字滴定器50ml-1.jpg

Bottle Top Burettes Titreet for Pouch Battery Electrolyte Filling

It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.

溶剂处理系统-1.jpg

NMP Filtration System for Battery Coating

It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.

三门烤箱-1.jpg

3 Layers High Vacuum Degree Drying Oven for Laboratory

The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.

注液泵ZYB-01-3.jpg

Lab Liquid Filling Pump Device for Pouch Battery Electrolyte Injecting

It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.

箱式炉-1.jpg

Box-type Drying Furnace for Lab Research

This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc.

圆柱注液机-1.jpg

Vacuum Electrolyte Filling & Standing Machine for Cylindrical Cell Making

It is suitable for supercapacitor & battery electrolyte injection and standing.

加热对辊机200-1.jpg

200mm Width Calender with Heating for Electrtode Rolling Press

STC-JS200 is used for battery electrode calendering for lab battery research after coating and drying. It has a 200mm width roller and equipped with digital dial indiactor which owns higher working efficiency.

TICO New Semi-auto Stacking Machine for Pouch Cell Making

STC-SAS200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.

真空干燥箱50L-1.jpg

50L Compact Vacuum Drying Chamber Equipped with Inert Gas Valves for Lab

STC-ZKX50 is a compact vacuum drying oven equipped with inert gas valve widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions.The heating temperature max to 200℃ adjustable.

圆柱自动封口机-1.jpg

Automatic Cylindrical Cell Crimping Mahcine for Lab Battery Pilot Line

It is an automatic crimping machine for cylindrical cell case with automatic feeding & discharging.

电动对辊机100-2.jpg

Electric Calender with Winder & Unwinder

STC-DGL100 is a compact electric roll press machine with winding &unwinding device, which can be used for battery electrode pressing. The pressing thickness and speed can be adjusted.

真空干燥箱-2.jpg

90L Vacuum Battery Electrode Drying Cabinet for Lab Battery R&D

STC-ZKX90 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.

涂膜机300-1.jpg

Compact Vacuum Tape Casting Machine for Lab Battery Research

STC-TM300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.

扣式手动冲片机-1.jpg

Coin Cell Electrode Punching Machine for Button Cell Fabrication

STC-CP60 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.

横切机300-1.jpg

Automatic Roll-to-Sheet Battery Electrode Cutting Machine

STC-RHQ300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.

四门圆筒真空烤箱-1.jpg

Four-door Circular Vacuum Oven for Battery Making

STC-YKX4 is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.

涂膜烘干机TMHD800-1.jpg

800mm Film Coating Machine with Bottom Heater

STC-DTH800 is a compact tape casting film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

Semi-auto Stacking Machine for Pouch Cell Electrode Making

STC-SAS200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.

干燥箱1.jpg

25L Vacuum Drying Oven for Lab Battery Material Drying

STC-ZKX25 is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 25L volume with two layers bracket.

涂膜烘干机 TMHD-250-1.jpg

300mm Film Coating Equipment with Bottom Heating Device

STC- DTH300 is a large electrode film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

热压机200-1.jpg

Hot Flat Pressing Machine for Battery Research

STC-RPY200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking /winding to make it easy to put into aluminium-laminated case and pouch cell formation. The heating pressing die size is 200 x 200mm. The heating temperature room temperature ~ 250℃ adjustable.

鼓风干燥箱(1).jpg

Air-forced Drying Oven for Lab Research

STC- GFX50 is a compact drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set. Air-forced circulation system can improve the temperature uniformity inside the chamber.

扣式波形弹片-2.jpg

Wave Spring for Coin Cell

Coin cell wave spring for lab battery material.

扣式垫片-2.jpg

Coin Cell Spacer

Coin cell spacer for lab battery material.

管式炉-1.jpg

Laboratory Tube Furnace for Lab Testing Samples Drying

This furnace provides the experiment environment of vacuum, atmosphere control and high temperature to enterprises laboratory, universities, research institutes, scientific research, research institutions, etc.

真空干燥箱-2.jpg

90L Vacuum Battery Electrode Drying Cabinet for Lab Pouch Battery R&D

STC-ZKX90 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.

老款真空干燥箱-1.jpg

25L Compact Lab Vacuum Dry Oven with Digital Temperature Display

STC-ZKX25 is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is 25L volume with 2 layers bracket.

扣式壳盖2016-2.jpg

CR2016 Coin Cell Case

SUS 304 stainless steel coin cell case for cr2016

静置箱软包-1.jpg

Vacuum Electrolyte Diffusion Chamber for Pouch Cell Lab Research

STC-JZX300L is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to pouch cell.

扣式壳盖2025-2.jpg

CR2025 Coin Cell Case

SUS 304 stainless steel cr2025 coin cell case

软包电池顶侧封-1.jpg

Lab Polymer Pouch Cell Case Top & Side Edges Hot Sealing Machine

STC-SFZ200L is a pouch cell aluminum-laminated case edges hot sealing with tab machine before electrolyte filling process. The temp of upper and lower sealing head can be controlled separately and settable.

三门烤箱-1.jpg

3 Layers Vacuum Drying Chamber for Lab Research

The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.

扣式正盖-3.jpg

CR2032 Coin Cell Case

SUS 304 stainless steel coin cell case

箱式炉-2.jpg

Muffle Furance Box-type Drying Chamber for Lab Research

This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc. It is widely used for universities, research institutes, enterprise R&D centers, quality inspection units, processing industries, etc.

模切机-1.jpg

Semi-auto Pouch Cell Electrode Die Cutting Machine for Lab Research

STC-MQ280 semi-auto electrode die cutter is a necessary equipment for pouch cell preparation, it is used for pouch cell electrode cutting to produce specific shapes of cathode and anode with current collector tab.

预封机200-3.jpg

Vacuum Sealing Machine for Pouch Cell Preparation

STC-YF200 used for aluminum laminated pouch cell vacuum hot sealing after electrolyte injection into cell.

干燥箱1.jpg

Desktop Lab Vacuum Oven

STC-ZKX50 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set.

扣式锥形弹片-2.jpg

Conical Spring for Coin Cell

Coin cell conical spacer for lab battery material.

老款真空干燥箱-1.jpg

50L Compact Vacuum Drying Oven for Laboratory

STC-ZKX50 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.

圆柱钢壳盖帽18650-1.jpg

18650 Cylindrical Battery Case

18650 Cylindrical cell stainless steel case

热整平机-1.jpg

Pouch Cell Hot Flat Press Machine for Lab Battery Research

STC-RPY200L hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking, winding to make it easy to put into aluminum-laminated case and pouch cell formation.

扣式正盖-3.jpg

CR2032 Coin Cell Case

SUS 304 stainless steel CR2032 coin cell case

二封机-1.jpg

Compact Pouch Cell Secondary Sealing Machine for Lab Battery Research

STC-BFZ200L vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation.

冲壳机-1.jpg

Semi-auto Pouch Cell Cup Punching Machine for Polymer Battery Research

STC-CK200L semi-auto case /cup forming machine is used for prepare pouch cell case made of aluminum-laminated films.IR sensor, dual start buttons and protection cover are included for safety operation.

圆柱钢壳盖帽21700-1.jpg

21700 Cylindrical Battery Case

21700 Cylindrical cell stainless steel case

极耳-9.jpg

Nickel Plated Strip

Nickel planted strip for lab battery material

单节对面双工位-1.jpg

Double-sided 2 Work Stations Vacuum Glove Box for Lab Pouch Cell Making

STC-VGB-12 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.

铜网-1.jpg

Copper Foil

Copper foil for battery material.

预封机-1.jpg

Vacuum Pre-sealing Machine for Pouch Cell Making

STC-YF200L is used for pouch cell aluminum-laminated case vacuum pre-sealing after battery liquid filling into cell.

极耳-7.jpg

Aluminum Strip

Aluminum strip for lab battery material

8 Channels 5V5A Battery Testing System for Pouch Cell

STC-9008-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.

真空泵VSV-20-1.jpg

Vacuum Pump for Lab Vacuum Equipment

This vacuum pump is an oil sealed single-stage rotary vane pump, can be used to pump inactive gas within the scope of low vacuum and a small amount of non-condensable gas, Special suitable for packaging machinery, analytical instrument, laboratory and etc.

铝箔-1.jpg

Lab Battery Grade Aluminum Foil

Aluminum foil for battery material.

热封机200-3.jpg

Pouch Cell Case Heat Sealer for Aluminum-laminated Case

STC-SFZ200 is used for pouch cell aluminum laminated case top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.

铜网-1.jpg

Lab Battery Grade Copper Net

lab battery research material copper net

泡沫镍-1.jpg

Nickel Foam for Lab Battery Material

Nickel foam for battery material.

卷绕机10060ZT-1.jpg

Semi-auto Winding Machine for Pouch Cell

It is used for pouch cell winding, manually load the electrode, the winding will be completed automatically.

铝塑膜-1.jpg

Lab Battery Grade Aluminum Laminated Film

Aluminum laminated film for battery material.

注液静置-1.jpg

2-in-1 Vacuum Electrolyte Filling & Standing Machine

It is used for the electrolyte injection and vacuum standing process for battery. It adopts vacuum first, then liquid injection and vacuum standing. The electrolyte has high precision, absorption consistency and high reliability.

全自动卷绕机-1.jpg

Super Capacitor Automatic Winding Machine

It is a fully automatic winding machine for lithium batteries supercapacitor, which is with the function of monitoring winding length and diameter. It is capable to carry out chamfer, hole punching, short circuit testing, it features stable working status and technology guarantee.

电容器烤箱-1.jpg

Supercapacitor Vacuum Drying Oven

It is mainly used for vacuum drying, nitrogen filling and cyclic baking of batteries and supercapacitors. The product is kept in an anhydrous and oxygen-free environment and transferred into the glove box for liquid injection.

电容器连续整形机-1.jpg

Supercapacitor Forming Machine

It is mainly used to trim and align the cells of batteries and supercapacitors and compact the end faces of negative poles, to facilitate laser welding the upper and lower current collectors.

电容器滚槽封口机-3.jpg

Super Capacitor Grooving & Pre-sealing Machine

It is suitable for grooving, pre-sealing and crimping of supercapacitor cases.

电容器入壳机-1.jpg

Supercapacitor Cell to Case Insert Machine

It is used to press supercapacitors (after the welded cell is assembled with O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.

电容器注液机-1.jpg

Supercapacitor Electrolyte Injecting Machine

It is suitable for supercapacitor injection by means of vacuuming, injection and pressurization, which features high consistency, reliability and safety of electrolyte absorption.

电容器二封机-5.jpg

Super Capacitor Secondary Sealing Machine

It is suitable for secondary molding, sealing and crimping of battery and supercapacitor cases.

极耳铆钉机MY130-1.jpg

Ox-horn Supercapacitor Manual Riveting Machine

It is used for super capacitor riveting. It is manual operation, small size, a perfect decide for super capacitor lab research.

电容器滚槽机-2.jpg

Ox-horn Supercapacitor Semi-auto Grooving Machine

STC-ZG650 is TICO TECHNOLOGY's new generation of cylindrical cell grooving machine, it is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650, 26650, 21700, and other cylindrical cells.

极耳刺孔机-1.jpg

Ox-horn Supercapacitor Hole Punching Machine

STC-SCK30 is used for ox-horn supercapacitor core and pole ear punching. Different size of punching die is optional, easy to replace die.

测试仪10mA-1.jpg

8 Channels 5V10mA Battery Tester

STC-4008-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

卷绕机14010YZD-1.jpg

Semi-auto Winding Machine for Supercapacitor

It is used for cylindrical cell winding. Manually load the electrode to the winding part, winding with separator, the tape sticking and unloading will be finished automatically.

单节对面双工位-1.jpg

Double-sided 2 Work Stations Vacuum Glove Box for Lab

STC-VGB-12 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.

电池测试仪100V20A-1.jpg

100V30A Battery Testing System

100V30A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.

电容器滚槽机-1.jpg

Semi-auto Grooving Machine

It’s used for supercapacitor case grooving.

测试仪50mA-1.jpg

8 Channels 5V50mA Battery Testing Equipment

STC-4008-5V50mA-164 is a 8 channels battery testing system used for coin cell testing from 5uA~50mA, up to 5V. It is three range, 5uA~1mA,1mA~25mA,25mA~50mA.It is a reliable device for universites.

三节快掀手套箱-1.jpg

3 Part Quick to Open Vacuum Glove Box for Battery Polit line

STC-VGB2660-KX vacuum glove box is used for battery pilot line, and factory production. It is a quick to open vacuum glove chamber with three seactions. This machine is an ideal equipment for battery pilot line and factory production.

电容器封口机-1.jpg

Supercapacitor Sealing Machine

It is used for supercapacitor case sealing.

涂膜机-1.jpg

Lab Battery Tape Casting Machine for Laboratory Battery Rsearch

STC-TM300 is a compact tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.

TMQ100可调-1.jpg

100mm Width Micrometer Adjustable Doctor Blade

It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.

TMQ150固定-1.jpg

150mm Width Fixed Film Coating Applicator for Lab Research

It is a fixed thickness precision film applicator for lab small qty coating, various of models can be optional.

数显涂膜器 150可调-1.jpg

Digital Micrometer Film Applicator

Widely used for various coating researches in lab, like battery electrode, ceramic film, crystalline film, nano film, etc.

测试仪 5V12A-1.jpg

8 Channels 5V6A Battery Testing Equipment

CT-4008-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

单节单工位手套箱.jpg

Internet of Things Vacuum Glovebox with Gas Purification System H2O & O2 < 1ppm

STC-VGB-11 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.

TMQ100固定-1.jpg

100mm Width Micrometer Film Applicator for Lab Coating Research

It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.

单工位注液机-1.jpg

Supercapacitor Electrolyte Filling Machine

It is used for supercapacitor electrolyte filling. Vacuuming filling and pressurization working process is used, which features high consistency, reliability and safety of electrolyte absorption.

单节双工位手套箱.jpg

Single-sided Double Stations Vacuum Glove Box for Battery Research

STC-VGB-L12 is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.

TMQ150可调-1.jpg

150mm Width Adjustable Film Coating Applicator for Lab Research

It is a compact device for various of coating research for lab,especially for battery electrode coating,ceramic coating ,nano film,etc.The coating width can be adjusted.

电芯整形机-1.jpg

Supercapacitor Forming Machine

It is used supercapacitor cell core forming to makes positive and negative end surface compact, facilitate the upper and lower current collector laser welding.

内阻测试仪BTS-100-1.jpg

Battery Internal Resistance Testing Machine for Lab Research

Internal resistance testing machine is mainly used for testing the internal resistance and voltage of various batteries, with the features of small size, light weight, exquisite appearance, stabile performance and easy to carry.

5V5A 8 Channels Battery Testing System

STC-9008-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.

TMQ250可调-1.jpg

250mm Width Adjustable Film Coating Applicator for Lab Research

It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc. The coating width can be adjusted.

电容器二封机-1.jpg

Supercapacitor Secondary Press Sealing Machine

It is used supercapacitor case secondary pressing sealing.

两节双工位手套箱.jpg

IOT Two-part Double Work Stations Vacuum Glovebox

STC-1220GB11 is an internet of things vacuum glovebox, centralized equipment management intelligent analysis & early warning of equipment status, the abnormal alarm message is actively sent, remote fault diagnosis and online debugging.

入壳机-1.jpg

Supercapacitor Cell to Case Insert Machine

It is used to press supercapacitors (after the welded cell is assembled with the O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.

十挡分选机18650-1.jpg

10 Channels Cylindrical Battery Grading & Sorting Equipment for Production Line

Cylindrical cell sorting machine is applied in battery grade sorting by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.

测试仪 5V12A-1.jpg

5V12A 8 Channels Battery Testing Equipment

STC-4008-5V12A-TB-F is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

小电容器旋压封口机XF20-1.jpg

Ox-horn Supercapacitor Sealing Machine

It is used for small Ox-horn supercapacitor aluminum can automatic spinning pressing sealing machine.

五挡分选机18650-1.jpg

5 Channels 18650 Cylindrical Battery Sorting Machine for Production Line

18650 Cylindrical cell sorting machine is used for sorting 18650 battery grade by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.

电池测试仪100V20A-1.jpg

100V20A Battery Testing Equipment

100V20A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.

电池测试仪-1.jpg

80 Channels 5V6A Battery Testing Equipment

STC-40080-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.

20210519153809186.jpg@!jw1600

Supercapacitor Manual Riveting Machine

STC-NMJ30 is a manual riveting machine which is used for supercapacitor cap and tab riveting .

20210519142621412.jpg@!jw1600

Super Capacitor Tab Hole Punching Machine

STC-NCK30 punching machine is used for ox-horn super capacitor tab hole punching

电容器滚槽封口机-1.jpg

Pin-supercapacitor Grooving & Crimping Machine

This equipment is used for pin supercapacitor aluminum case grooving and crimping. It is a multi-functional device which is compact size, high efficiency for small size supercapacitor research.

电动对辊机100-1.jpg

100mm Width Hot Rolling Press Machine for Battery Research

STC-JS100 is a compact electric hot roll press used for battery electrode pressing, max temperature to 120℃ adjustable. The pressing gap and pressing speed is adjustable. It is compact size perfect for battery research.

Manual Hydraulic Cylindrical Cell Crimping Machine for Lab Battery

The STC-YSF65 is a compact hydraulic crimping machine for all types of cylindrical cell crimping for battery labs, such as 18650,26650,21700,AA,AAA,etc. Small size allow it to be put into glove box through big antechamber.

新棟力超声焊机1KW-2.jpg

1000W Ultrasonic Mental Spot Welding Machine for Aluminum &Copper Foil

STC-CSH1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.

涂膜烘干机-1(L).jpg

Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck

STC-TMH250 is a compact film tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.