Address: 3F,Bldg 6,Haihai Da Tianliao
Technology Park,Yutang Subdistrict,
Guangming ,Shenzhen ,China
Coin Cell Lab Machine
Pouch Cell Lab Machine
Cylindrical Cell Lab Machine
Ball Milling
Mixer
Film Coating
Roll Press
Electrode Cutting
Battery Testing Equipment
Oven
Glove Box
Super Capacitor Machine
Material
Product Details
Similar Product
80 Channels 5V6A Battery Testing Equipment
STC-40080-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Supercapacitor Manual Riveting Machine
STC-NMJ30 is a manual riveting machine which is used for supercapacitor cap and tab riveting .
Super Capacitor Tab Hole Punching Machine
STC-NCK30 punching machine is used for ox-horn super capacitor tab hole punching
Pin-supercapacitor Grooving & Crimping Machine
This equipment is used for pin supercapacitor aluminum case grooving and crimping. It is a multi-functional device which is compact size, high efficiency for small size supercapacitor research.
100mm Width Hot Rolling Press Machine for Battery Research
STC-JS100 is a compact electric hot roll press used for battery electrode pressing, max temperature to 120℃ adjustable. The pressing gap and pressing speed is adjustable. It is compact size perfect for battery research.
Manual Hydraulic Cylindrical Cell Crimping Machine for Lab Battery
The STC-YSF65 is a compact hydraulic crimping machine for all types of cylindrical cell crimping for battery labs, such as 18650,26650,21700,AA,AAA,etc. Small size allow it to be put into glove box through big antechamber.
1000W Ultrasonic Mental Spot Welding Machine for Aluminum &Copper Foil
STC-CSH1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.
Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck
STC-TMH250 is a compact film tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
Coin Cell Electrode Punching Machine for Button Cell Fabrication
STC-CP60 disc cutter is used for coin cell precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
500ml Planetary Vacuum Slurry Mixer for Lab Material Research
STC-XJB500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
4x500ml Planetary Ball Milling Machine for Lab Research
STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
Desktop Semi-auto Battery Electrode Slitting Machine
STC-BFT300 is a semi-auto slitting machine for battery electrode for battery research. The slitting width can be made according to requirement.
Compact Vacuum Tape Casting Machine for Battery Laboratory
STC-TM300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.
New Design Cylindrical Cell Grooving Machine for Lithium Battery Making
STC-ZG650 is TICO TECHNOLOGY new product. It is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650,26650,21700,and other cylindrical cells.
Manual Hydraulic Crimper for CR20xx Series Coin Cell Cases
The STC-SF120 compact hydraulic crimping machine is used for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20xx series crimping die is included as standard, the other crimping die set is optional. Coin cell disassembly die and tablet pressing die can be optional.
100mm Width Hot Calender for Lab Battery Research
STC-JS100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
TICO New Design Semi-auto Electrode Stacking Machine
STC-SDP200 is a new designed semi-auto electrode stacking machine, which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch cell core.
Slurry Feeding Machine for Battery Electrode Coating
STC-JG5L slurry feeding system is mainly used for slurry feeding when battery electrode coating, and also can be applied in other slurry feeding.
350mm Width Battery Electrode Slitting Machine
STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
Planetary Ball Miller for Lab Research with 4x500ml Milling Container
STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
Automatic Roll-to-Sheet Battery Electrode Cutting Machine
STC-RHQ300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.
4'' Width Electric Roll Press Machine for Battery Electrode Pressing
STC-DG100 is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.
Lab Vacuum Pre-sealing Equipment for Pouch Cell Preparation
STC-YF200 is a laminated-aluminum case/cup hot sealing equipment for polymer pouch cell pre-sealing after the battery electrolyte injection into the cell.
Pneumatic Cylindrical Cell Spot Welding Machine for Lab Research
This product is the enormously popular AC pluse tab welder, controlled by single chip microcomputer. Its capability is more stable and reliable. It is designed for producing high standard NiCr, Ni-Mh, Li batteries, used for welding cylinder cell negative terminal and tab (single pin welding).
Transfer Roll to Roll Film Coating Machine for Lithium Battery Electrode
This machine a three roller transfer coating equipment, which can be used for continuous coating and intermittent electrode coating, and it is convenient to apply for surface coating for various substrates. Especially used in the lithium ion battery electrode coating.
Lab Slurry Filtering Machine for Battery Material Fabrication
STC-FT500ml filtering device is mainly used for sample testing in lab, which is applied in filtering various of hard particles whose size is no less than 124µm in slurry. Exquisite appearance, and convenient to operate.
Square-shape Planetary Ball Milling Machine for Lab Material Grinding
STC-FQM-6L planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc.
Decrimping Die for Coin Cell CR20xx Series
This is the coin cell decrimping die for CR20xx series, and it is made of stainless steel naterial.
Roll to Roll Coater Equipment for Lithium Cylindrical Cell Electrode
It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.
4'' Width Electric Roll Press Machine for Coin Cell Electrode Calendering
STC-DG100L is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.
400mm Width Pouch Cell Hot Sealer for Aluminum-laminated Film Battery Cup
STC-SFZ400 is used for Polymer pouch cell aluminum laminated cup top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.
Roll to Roll Coater Equipment for Lithium Pouch Cell Electrode
It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.
Automatic Vacuum Tape Casting Machine with Heating Cover & Vacuum Chuck
STC-TMH250 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
Roll to Roll Continuous Cylindrical Cell Electrode Slitting Machine
It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.
Pouch Cell Final Vacuum Sealing Machine with Auto Piercing Function
STC-BFZ200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing.
Large Vacuum Tape Casting Machine with Top Cover Heater for Cylindrical Battery Electrode
STC-TM800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.
Lab Planetary Ball Miller with 4x100ml Grinding Containers for Coin Cell
STC-XQM0.4R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.
Touch Screen Controlled Electric Crimper for Coin Cell Research
STC-DF160 is a compact electric crimper for CR2016,CR2025,CR2032, the other crimping die set can be optional. It is touch screen controlled with high automation. Stainless steel crimping die, anti-corrosion and durable.
Electrolyte Vacuum Diffusion Machine for Polymer Pouch Battery
STC-JZX300 is mainly used for absorbing the electrolyte and making it mix with electrode more completely under the condition of vacuum after injecting electrolyte to punch cell and cylindrical cell. The whole equipment is made of high-quality electronic component and materials.
5L Planetary Vacuum Slurry Mixing Machine for Cylindrical Cell Making
STC-XJB-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.
Gas Driven Crimping Machine for CR20xx Series Coin Cell Assembly
The STC-QF20 is a compact gas driven crimping machine for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20XX series crimping die is included as standard, the other crimping die set is optional. It is perfect to be used inside of glovebox from big antechamber, no leakage.
Semi-auto Pouch Cell Case Punching & Forming Machine
STC-CK200 semi-auto pouch cell case punching machine is used for aluminum-laminated case forming. IR sensor, double start buttons and visual protection cover for safety operation.
Four-door Circular Vacuum Oven for Cylindrical Cell
STC-YKX4 is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.
Semi-auto Pouch Cell Electrode Die Cutter for Lab Battery Making
STC-MQ280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.
Semi-auto Winding Machine for Cylindrical Cell
It is used for cylindrical cell winding, manually load the electrode,the winding will be completed automatically.
Compact Slurry Vacuum Mixer for Coin Cell Research
STC-ZJB150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It is with 150ml mixing container, other volume of mixing container is optional.
350mm Width Battery Electrode Slitting Machine for Cylindrical Battery Making
STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
Compact Disc Cutter for Coin Cell Separator Making
STC-CP60 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
Battery Slurry Iron Removing & Filtting Machine for Battery Fabrication
This machine is used for battery slurry iron removing and filtering.
Micro Vibration Ball Milling Machine for Lab Material Grinding
STC-WQM1 Micro vibration ball milling machine is a high-power micro vibration ball milling and material mixing machine, which is suitable for small batch material ball milling and mixing of small amounts of substances. It used 2 ml disposable screw microtubes, and mixing of 3 samples can be performed simultaneously (usually can be performed within 45s)
Continuous Roll to Roll Transfer Film Coating Machine with Three Parts of Drying Chamber for Battery Polit Line
STC-RTCA300-3JF is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.
Manual Calendering Equipment for Battery Electrode Making
STC-SG150L manual calendering equipment is used for battery electrode making after coating and drying. It is a bench-top, manual operation with a 150mm width roller, easy to operation.
4x500ml Planetary Ball Milling Machine for Lab Pouch Cell Research
STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
Compact Gas Driven Electrode Die Cutter for Pouch Cell Research
STC-QMQ85 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.
150ml Compact Planetary Vacuum Mixer for Lab Battery Slurry Mixing
STC-XJB150 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
Planetary Ball Mill for Glove Box Use
STC-XQM0.2G is a supper mini model of vertical planetary ball mill, which is specially designed to be used for grinding materials under vacuum or inert gas atmosphere conditions inside the glove box. It is split design, the ball mill is put into glovebox, the controller is used outside glove box.
Cylindrical Cell Gas Driven Crimping Machine for Battery Research
The STC-YQF65 is a compact gas driven crimping machine for all types of cylindrical cell crimping, such as 18650,26650,AA,AAA, etc. It is perfect to use it into glove box without leakage.
Roll to Roll Hydraulic Calendaring Machine with Winding & Unwinding Device
STC-HDG300 is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.
Slot Die Roll to Roll Electrode Film Coating Machine
This machine is applied in Lithium-ion battery electrode coating process of cathode & anode. The slot extrusion coating die is used for non-contact coating to substrate, which can realize the continuous, intermittence, stripe film coating and etc.
Semi-auto Battery Electrode Die Cutter for Pouch Cell Research
STC-MQ280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.
Compact Vacuum Tape Casting Machine for Coin Cell Making
STC-TM300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.
500ml Planetary Slurry Vacuum Mixer for Lab Pouch Cell Research
STC-XJB500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
Desktop Planetary Ball Mill with 4x100ml Milling Containers for Lab Material Grinding
STC-XQM0.4R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.
NMP Filtration System for Battery Coating
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.
Continuous Roll to Roll Transfer Film Coating Machine with Two Parts of Drying Chamber for Battery Polit Line
STC-RTCA300-2JF is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.
Lab Filling Pump Device for Cylindrical Battery Electrolyte Injection
It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.
Internet of Things Vacuum Glovebox with Gas Purification System H2O & O2 < 1ppm
STC-VGB-11 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.
Compact Disc Cutter for Coin Cell Separameter Making
STC-CP60 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
Lab Vacuum Slurry Mixing Machine for Battery Making
STC-ZJB150 is a bench-top vacuum mixer with vacuum mixing and dispersion function, which is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It has a 150ml mixing container, other volume of mixing container is optional.
Continuous Hydraulic Calendaring Machine for Battery Electrode Fabrication
STC-HDG300 is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.
Large Vacuum Tape Casting Machine with Top Cover Heater for Pouch Battery Electrode Making
STC-TM800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.
Cylindrical Cell Manual Winding Machine
STC-YSJ65 is a compact desktop manual winding machine for winding cylindrical cell electrode & separator to make a battery cell core. The winding speed is adjustable.
Automatic Coin Cell Electrode Cutting Machine
It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.
Mini Lab Vertical Planetary Ball Mill with 4x50ml Ports Grinding
STC-XQM0.2R planetary ball mill is widely used for geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine.It is with 4pcs 50ml milling jars. Milling speed, time and mode can be set according to different experiment requirement.
Heat Rolling Press Machine for Pouch Cell Fabrication
STC-JS100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
Ultrasonic Welding Machine for Battery Lab Research
STC-CSH1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.
Coin Cell Disassembling Machine for Battery Research
The STC-CX20 compact hydraulic disassembling machine used for all types of coin cell cases disassembling, such as CR2032, CR2450, etc. CR20xx series disassembling die is included as standard, the other die set is optional. Coin cell crimping die can be optional and easy to replace.
Pouch Cell Manual Winding Machine
STC-FSJ90 is a compact desktop manual winding machine for winding pouch cell electrode & separator to make a battery cell core. With optional cylindrical cell winding die, it can be used for cylindrical cell winding.
Heat Rolling Press Machine for Cylindrical Cell Research
STC-JS100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
Compact Gas Driven Electrode Die Cutter for Pouch Cell Research
STC-QMQ85 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.
Desktop Semi-auto Battery Electrode Slitting Machine for Cylindrical Cell
STC-BFT300 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
50L Compact Vacuum Drying Oven for Coin Cell Research
STC-ZKX50 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.
3-in-1 Hot Sealer for Edge & Vacuum Sealing & Vacuum Standing Equipment for Pouch Cell R&D
It is a 3 in 1 machine for pouch cell research. It can be compatible with the following functions. Pouch cell top & side heat sealing before electrolyte injection. Pouch cell vacuum standing for electrolyte diffusion, different parameter can be saved. Pouch cell vacuum hot sealing.
Coin Cell Electrode Cutting Machine for Laboratory Research
STC- PT-10 is a coin cell disc cutter for electrode precision cutting, which can be easily placed into a glovebox.
500ml Planetary Slurry Vacuum Mixer for Lab Cylindrical Cell Research
STC-XJB500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
Compact Manual Hydraulic Die Cutting Machine for Pouch Cell
It is used for battery electrode die cutting for pouch cell cathode & anode. Compact size can be put inside glove box.
8 Channels 5V10mA Battery Tester for Coin Cell Lab Research
CT-4008-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
4x500ml Planetary Ball Miller for Cylindrical Cell Lab Research
STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
Hand-held Coin Cell Disc Cutter for Electrode Making
STC-SCQ-YP is a hand-held manual disc cutter for cutting round discs, different diameter is optional. It is widely used for battery electrode cutting, foil material cutting, sampling, etc.
4x500ml Planetary Ball Miller for Lab Pouch Cell Research
STC-XQM2R planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
5L Planetary Slurry Vacuum Mixer for Lab Pilot Line
STC-XJB-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.
Horizonal Manual Rolling Press Machine for Laboratory Research
STC-HSG100 is a hand operation batteryelectrode rolling press machine after coating and drying. It is bench-top and compact dimension, 100mm width roller, and easy for operation.
Bottle Top Burettes Titreet for Cylindrical Battery Electrolyte Filling
It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.
Large Vacuum Tape Casting Machine with Top Cover Heater for Battery Electrode
STC-TMH800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.
Automatic Coin Cell Electrode Punching Machine
It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.
20L Square-shape Planetary Ball Milling Machine
STC-XQM20 planetary ball milling machine is widely used in many fields,like geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. Different material of milling jar is optional according to the milled material.
4 Paths Film Applicator with Fixed Thickness
It is fixed thickness precision film applicator with four paths for lab small qty coating, various of models can be optional.
8 Channels 5V10mA Battery Analyzer System for Lab Coin Cell Research
STC-4008-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Compact Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck
STC-TMH250 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
Single-sided Double Stations Vacuum Glove Box for Cylindrial Cell Battery Research
STC-VGB-L12 is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.
Compact Hydraulic Die Cutting Machine
It is used for battery electrode die cutting for pouch cell cathode&anode. Compact size can be put inside glove box.
Lab Compact Battery Slurry Feeding System
This slurry feeding system is used for battery electrode coating Slurry feeding, and also can be applied in others slurry feeding. It has exquisite appearance, equips with two pumps and cache tanks for cathode & anode slurry feeding for high efficiency operation.
Compact Slurry Vacuum Mixer for Lab Research
STC-ZJB150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble.It is with 150ml mixing container, other volume of mixing container is optional.
Coin Cell Crimping Die for CR20xx Series
This is the coin cell crimping die for CR20xx series, and it is made of stainless steel naterial.
Cylindrical Cell Case Disassembly Machine for Performance Testing
It is mainly used for cylindrical cell case disassembly after the cell case crimping, in order to test the battery performance. Different die can be equipped for various size cylindrical cell.
NMP Filtration System for Battery Coating
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.
Lab Battery Electrode Rolling Press Machine with Digital Micrometer for Pouch Cell
STC-DCM100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
Roll to Roll Continuous Slitting Machine for Battery Electrode Making
It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.
Battery Electrode Stacking Machine for Lab Pouch Cell Research
STC-SDP200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.
Vacuum Electrolyte Diffusion Equipment for Lab Cylindrical Cell Fabrication
STC-JZX300L is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to cylindrical cell.
Lab Vibration Machine with 6 Layers Sieves for Battery Macking Making
This machine is a standard analytical sieve that integtrates powder classification and liquid filtration; it is suitable for laboratories and quality inspection rooms for accurate analysis of particle size structure of particles and ppowders, liquid solids content and sundries content testing analysis.
2-in-1 Vacuum Standing & Hot Pre-sealing Equipment for Lab Polymer Cell Research
STC-JY200 is a 2-in-1 machine for pouch cell research. The key feature of this machine is compatible with the following two functions. Vacuum standing for electrolyte diffusion after electrolyte filling and hot sealing for pouch cell first sealing.
Laboratory Cylindrical Battery Case Grooving Machine for 18650 21700 26650 Cylinder Battery
STC-GC650L semi-auto cylindrical cell case grooving machine, which is mainly used in laboratory for 18650, 21700, 26650, 32650 cylindrical cell grooving.
Gas Driven Pouch Cell Case Forming Machine for Pouch Cell Preparation
STC-QCK65 is a gas driven machine for aluminum-laminated film pouch cell case forming.The case punching depth can be adjustable.
5V12A 8 Channels Battery Testing Equipment for Cylindrical Cell
STC-4008-5V12A-TB-F is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Battery Electrode Rolling Press Machine with Digital Micrometer
STC-DCM100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
Bottle Top Burettes Titreet for Pouch Battery Electrolyte Filling
It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.
NMP Filtration System for Battery Coating
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.
3 Layers High Vacuum Degree Drying Oven for Laboratory
The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.
Lab Liquid Filling Pump Device for Pouch Battery Electrolyte Injecting
It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.
Box-type Drying Furnace for Lab Research
This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc.
Vacuum Electrolyte Filling & Standing Machine for Cylindrical Cell Making
It is suitable for supercapacitor & battery electrolyte injection and standing.
200mm Width Calender with Heating for Electrtode Rolling Press
STC-JS200 is used for battery electrode calendering for lab battery research after coating and drying. It has a 200mm width roller and equipped with digital dial indiactor which owns higher working efficiency.
TICO New Semi-auto Stacking Machine for Pouch Cell Making
STC-SAS200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.
50L Compact Vacuum Drying Chamber Equipped with Inert Gas Valves for Lab
STC-ZKX50 is a compact vacuum drying oven equipped with inert gas valve widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions.The heating temperature max to 200℃ adjustable.
Automatic Cylindrical Cell Crimping Mahcine for Lab Battery Pilot Line
It is an automatic crimping machine for cylindrical cell case with automatic feeding & discharging.
Electric Calender with Winder & Unwinder
STC-DGL100 is a compact electric roll press machine with winding &unwinding device, which can be used for battery electrode pressing. The pressing thickness and speed can be adjusted.
90L Vacuum Battery Electrode Drying Cabinet for Lab Battery R&D
STC-ZKX90 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.
Compact Vacuum Tape Casting Machine for Lab Battery Research
STC-TM300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.
Coin Cell Electrode Punching Machine for Button Cell Fabrication
STC-CP60 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
Automatic Roll-to-Sheet Battery Electrode Cutting Machine
STC-RHQ300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.
Four-door Circular Vacuum Oven for Battery Making
STC-YKX4 is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.
800mm Film Coating Machine with Bottom Heater
STC-DTH800 is a compact tape casting film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
Semi-auto Stacking Machine for Pouch Cell Electrode Making
STC-SAS200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.
25L Vacuum Drying Oven for Lab Battery Material Drying
STC-ZKX25 is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 25L volume with two layers bracket.
300mm Film Coating Equipment with Bottom Heating Device
STC- DTH300 is a large electrode film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
Hot Flat Pressing Machine for Battery Research
STC-RPY200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking /winding to make it easy to put into aluminium-laminated case and pouch cell formation. The heating pressing die size is 200 x 200mm. The heating temperature room temperature ~ 250℃ adjustable.
Air-forced Drying Oven for Lab Research
STC- GFX50 is a compact drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set. Air-forced circulation system can improve the temperature uniformity inside the chamber.
Wave Spring for Coin Cell
Coin cell wave spring for lab battery material.
Coin Cell Spacer
Coin cell spacer for lab battery material.
Laboratory Tube Furnace for Lab Testing Samples Drying
This furnace provides the experiment environment of vacuum, atmosphere control and high temperature to enterprises laboratory, universities, research institutes, scientific research, research institutions, etc.
90L Vacuum Battery Electrode Drying Cabinet for Lab Pouch Battery R&D
STC-ZKX90 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.
25L Compact Lab Vacuum Dry Oven with Digital Temperature Display
STC-ZKX25 is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is 25L volume with 2 layers bracket.
CR2016 Coin Cell Case
SUS 304 stainless steel coin cell case for cr2016
Vacuum Electrolyte Diffusion Chamber for Pouch Cell Lab Research
STC-JZX300L is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to pouch cell.
CR2025 Coin Cell Case
SUS 304 stainless steel cr2025 coin cell case
Lab Polymer Pouch Cell Case Top & Side Edges Hot Sealing Machine
STC-SFZ200L is a pouch cell aluminum-laminated case edges hot sealing with tab machine before electrolyte filling process. The temp of upper and lower sealing head can be controlled separately and settable.
3 Layers Vacuum Drying Chamber for Lab Research
The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.
CR2032 Coin Cell Case
SUS 304 stainless steel coin cell case
Muffle Furance Box-type Drying Chamber for Lab Research
This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc. It is widely used for universities, research institutes, enterprise R&D centers, quality inspection units, processing industries, etc.
Semi-auto Pouch Cell Electrode Die Cutting Machine for Lab Research
STC-MQ280 semi-auto electrode die cutter is a necessary equipment for pouch cell preparation, it is used for pouch cell electrode cutting to produce specific shapes of cathode and anode with current collector tab.
Vacuum Sealing Machine for Pouch Cell Preparation
STC-YF200 used for aluminum laminated pouch cell vacuum hot sealing after electrolyte injection into cell.
Desktop Lab Vacuum Oven
STC-ZKX50 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set.
Conical Spring for Coin Cell
Coin cell conical spacer for lab battery material.
50L Compact Vacuum Drying Oven for Laboratory
STC-ZKX50 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.
18650 Cylindrical Battery Case
18650 Cylindrical cell stainless steel case
Pouch Cell Hot Flat Press Machine for Lab Battery Research
STC-RPY200L hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking, winding to make it easy to put into aluminum-laminated case and pouch cell formation.
CR2032 Coin Cell Case
SUS 304 stainless steel CR2032 coin cell case
Compact Pouch Cell Secondary Sealing Machine for Lab Battery Research
STC-BFZ200L vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation.
Semi-auto Pouch Cell Cup Punching Machine for Polymer Battery Research
STC-CK200L semi-auto case /cup forming machine is used for prepare pouch cell case made of aluminum-laminated films.IR sensor, dual start buttons and protection cover are included for safety operation.
21700 Cylindrical Battery Case
21700 Cylindrical cell stainless steel case
Nickel Plated Strip
Nickel planted strip for lab battery material
Double-sided 2 Work Stations Vacuum Glove Box for Lab Pouch Cell Making
STC-VGB-12 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.
Copper Foil
Copper foil for battery material.
Vacuum Pre-sealing Machine for Pouch Cell Making
STC-YF200L is used for pouch cell aluminum-laminated case vacuum pre-sealing after battery liquid filling into cell.
Aluminum Strip
Aluminum strip for lab battery material
8 Channels 5V5A Battery Testing System for Pouch Cell
STC-9008-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.
Vacuum Pump for Lab Vacuum Equipment
This vacuum pump is an oil sealed single-stage rotary vane pump, can be used to pump inactive gas within the scope of low vacuum and a small amount of non-condensable gas, Special suitable for packaging machinery, analytical instrument, laboratory and etc.
Lab Battery Grade Aluminum Foil
Aluminum foil for battery material.
Pouch Cell Case Heat Sealer for Aluminum-laminated Case
STC-SFZ200 is used for pouch cell aluminum laminated case top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.
Lab Battery Grade Copper Net
lab battery research material copper net
Nickel Foam for Lab Battery Material
Nickel foam for battery material.
Semi-auto Winding Machine for Pouch Cell
It is used for pouch cell winding, manually load the electrode, the winding will be completed automatically.
Lab Battery Grade Aluminum Laminated Film
Aluminum laminated film for battery material.
2-in-1 Vacuum Electrolyte Filling & Standing Machine
It is used for the electrolyte injection and vacuum standing process for battery. It adopts vacuum first, then liquid injection and vacuum standing. The electrolyte has high precision, absorption consistency and high reliability.
Super Capacitor Automatic Winding Machine
It is a fully automatic winding machine for lithium batteries supercapacitor, which is with the function of monitoring winding length and diameter. It is capable to carry out chamfer, hole punching, short circuit testing, it features stable working status and technology guarantee.
Supercapacitor Vacuum Drying Oven
It is mainly used for vacuum drying, nitrogen filling and cyclic baking of batteries and supercapacitors. The product is kept in an anhydrous and oxygen-free environment and transferred into the glove box for liquid injection.
Supercapacitor Forming Machine
It is mainly used to trim and align the cells of batteries and supercapacitors and compact the end faces of negative poles, to facilitate laser welding the upper and lower current collectors.
Super Capacitor Grooving & Pre-sealing Machine
It is suitable for grooving, pre-sealing and crimping of supercapacitor cases.
Supercapacitor Cell to Case Insert Machine
It is used to press supercapacitors (after the welded cell is assembled with O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.
Supercapacitor Electrolyte Injecting Machine
It is suitable for supercapacitor injection by means of vacuuming, injection and pressurization, which features high consistency, reliability and safety of electrolyte absorption.
Super Capacitor Secondary Sealing Machine
It is suitable for secondary molding, sealing and crimping of battery and supercapacitor cases.
Ox-horn Supercapacitor Manual Riveting Machine
It is used for super capacitor riveting. It is manual operation, small size, a perfect decide for super capacitor lab research.
Ox-horn Supercapacitor Semi-auto Grooving Machine
STC-ZG650 is TICO TECHNOLOGY's new generation of cylindrical cell grooving machine, it is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650, 26650, 21700, and other cylindrical cells.
Ox-horn Supercapacitor Hole Punching Machine
STC-SCK30 is used for ox-horn supercapacitor core and pole ear punching. Different size of punching die is optional, easy to replace die.
8 Channels 5V10mA Battery Tester
STC-4008-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Semi-auto Winding Machine for Supercapacitor
It is used for cylindrical cell winding. Manually load the electrode to the winding part, winding with separator, the tape sticking and unloading will be finished automatically.
Double-sided 2 Work Stations Vacuum Glove Box for Lab
STC-VGB-12 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.
100V30A Battery Testing System
100V30A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.
Semi-auto Grooving Machine
It’s used for supercapacitor case grooving.
8 Channels 5V50mA Battery Testing Equipment
STC-4008-5V50mA-164 is a 8 channels battery testing system used for coin cell testing from 5uA~50mA, up to 5V. It is three range, 5uA~1mA,1mA~25mA,25mA~50mA.It is a reliable device for universites.
3 Part Quick to Open Vacuum Glove Box for Battery Polit line
STC-VGB2660-KX vacuum glove box is used for battery pilot line, and factory production. It is a quick to open vacuum glove chamber with three seactions. This machine is an ideal equipment for battery pilot line and factory production.
Supercapacitor Sealing Machine
It is used for supercapacitor case sealing.
Lab Battery Tape Casting Machine for Laboratory Battery Rsearch
STC-TM300 is a compact tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
100mm Width Micrometer Adjustable Doctor Blade
It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.
150mm Width Fixed Film Coating Applicator for Lab Research
It is a fixed thickness precision film applicator for lab small qty coating, various of models can be optional.
Digital Micrometer Film Applicator
Widely used for various coating researches in lab, like battery electrode, ceramic film, crystalline film, nano film, etc.
8 Channels 5V6A Battery Testing Equipment
CT-4008-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Internet of Things Vacuum Glovebox with Gas Purification System H2O & O2 < 1ppm
STC-VGB-11 is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.
100mm Width Micrometer Film Applicator for Lab Coating Research
It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.
Supercapacitor Electrolyte Filling Machine
It is used for supercapacitor electrolyte filling. Vacuuming filling and pressurization working process is used, which features high consistency, reliability and safety of electrolyte absorption.
Single-sided Double Stations Vacuum Glove Box for Battery Research
STC-VGB-L12 is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.
150mm Width Adjustable Film Coating Applicator for Lab Research
It is a compact device for various of coating research for lab,especially for battery electrode coating,ceramic coating ,nano film,etc.The coating width can be adjusted.
Supercapacitor Forming Machine
It is used supercapacitor cell core forming to makes positive and negative end surface compact, facilitate the upper and lower current collector laser welding.
Battery Internal Resistance Testing Machine for Lab Research
Internal resistance testing machine is mainly used for testing the internal resistance and voltage of various batteries, with the features of small size, light weight, exquisite appearance, stabile performance and easy to carry.
5V5A 8 Channels Battery Testing System
STC-9008-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.
250mm Width Adjustable Film Coating Applicator for Lab Research
It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc. The coating width can be adjusted.
Supercapacitor Secondary Press Sealing Machine
It is used supercapacitor case secondary pressing sealing.
IOT Two-part Double Work Stations Vacuum Glovebox
STC-1220GB11 is an internet of things vacuum glovebox, centralized equipment management intelligent analysis & early warning of equipment status, the abnormal alarm message is actively sent, remote fault diagnosis and online debugging.
Supercapacitor Cell to Case Insert Machine
It is used to press supercapacitors (after the welded cell is assembled with the O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.
10 Channels Cylindrical Battery Grading & Sorting Equipment for Production Line
Cylindrical cell sorting machine is applied in battery grade sorting by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.
5V12A 8 Channels Battery Testing Equipment
STC-4008-5V12A-TB-F is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Ox-horn Supercapacitor Sealing Machine
It is used for small Ox-horn supercapacitor aluminum can automatic spinning pressing sealing machine.
5 Channels 18650 Cylindrical Battery Sorting Machine for Production Line
18650 Cylindrical cell sorting machine is used for sorting 18650 battery grade by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.
100V20A Battery Testing Equipment
100V20A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.
80 Channels 5V6A Battery Testing Equipment
STC-40080-5V6A-S1 is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
Supercapacitor Manual Riveting Machine
STC-NMJ30 is a manual riveting machine which is used for supercapacitor cap and tab riveting .
Super Capacitor Tab Hole Punching Machine
STC-NCK30 punching machine is used for ox-horn super capacitor tab hole punching
Pin-supercapacitor Grooving & Crimping Machine
This equipment is used for pin supercapacitor aluminum case grooving and crimping. It is a multi-functional device which is compact size, high efficiency for small size supercapacitor research.
100mm Width Hot Rolling Press Machine for Battery Research
STC-JS100 is a compact electric hot roll press used for battery electrode pressing, max temperature to 120℃ adjustable. The pressing gap and pressing speed is adjustable. It is compact size perfect for battery research.
Manual Hydraulic Cylindrical Cell Crimping Machine for Lab Battery
The STC-YSF65 is a compact hydraulic crimping machine for all types of cylindrical cell crimping for battery labs, such as 18650,26650,21700,AA,AAA,etc. Small size allow it to be put into glove box through big antechamber.
1000W Ultrasonic Mental Spot Welding Machine for Aluminum &Copper Foil
STC-CSH1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.
Automatic Vacuum Film Coater with Heating Cover & Vacuum Chuck
STC-TMH250 is a compact film tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
At Tico, we strive to stay up to date with the latest technology and methodology in order to provide new and innovative products
PRODUCTS
Coin Cell Lab Machine
Pouch Cell Lab Machine
Cylindrical Cell Lab Machine
Ball Milling
Mixer
Film Coating
Roll Press
Electrode Cutting
Battery Testing Equipment
Oven
Glove Box
Super Capacitor Machine
Material
GIVE US A MESSAGE
Shenzhen Tico Technology Co., Ltd.