Address: 3F,Bldg 6,Haihai Da Tianliao
Technology Park,Yutang Subdistrict,
Guangming ,Shenzhen ,China
Address: 3F,Bldg 6,Haihai Da Tianliao
Technology Park,Yutang Subdistrict,
Guangming ,Shenzhen ,China
Product Details
Similar Product
STC-DDG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
STC- PT-10 is a coin cell disc cutter for electrode precision cutting, which can be easily placed into a glovebox.
STC-TM-300 is a compact tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
The machine integrates ultrasonic welding and automatic tab feeding function, enhancing the efficiency and precision of the battery production. The equipment mainly consists of ultrasonic generator, transducer, upper and lower horn, pneumatic parts, frame and so on. The upper and lower horns are made of new alloy materials with good abrasion resistance.
The Intermittent coating machine is a three-roller transfer coating equipment, which can be used for continuous coating and intermittent coating. It is convenient to apply for coating on various substrates, especially used for lithium-ion battery industry.
The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.
The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.The maximum volume of the equipment is 5L.
The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.
The equipment is mainly used for pouch lithium-ion batteries to be formation under hot-pressing condition. It can not only combine the existing battery formation process, drying and shaping process, but also shorten the formation time, reduce the battery production cycle and reduce labor.
The machine is mainly used for the third sealing of cylindrical batteries to make minor adjustments for the height and edges of the case.
STC-BMQ-A300 is applied to lithium battery cathode and anode electrode automatic die cutting. The equipment consists of automatic unwinding device, automatic correction device, electrode positioning device, electrode punching and cutting device, electrode sucking device, electrode placing device, driving traction device, tension device, automatic waste collection device.
STC-EQT-60 is suitable for lifting the lid of transfer bucket. The lid with the mixing head on the transfer bucket is very heavy and can be lifted very easily with a lifter.
After the mixer has finished making the slurry, pull the bucket to the lifter, then cover the mixing head and combine it as a slurry transfer bucket. Complete the storage and transfer of slurry from the mixing workshop to the coating workshop.
STC-TMZ-300F3 is a three-roller transfer coating equipment, which can be used for continuous coating and intermittent coating. It is convenient to apply for coating on various substrates, especially used for lithium-ion battery industry. This equipment is convenient for users to use, can meet the requirements of coating accuracy and consistency, and with excellent drying effect. It is the ideal choice for lithium-ion batteries, super capacitors, nickel batteries, etc.
STC-KZK-902Q2 is a 2 chambers vacuum drying oven which is widely used in laboratory. It is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time is adjustable, which can maximally reach to 200℃.
STC-KZK-904 is a compact vacuum drying oven, widely used in laboratory. It is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time is adjustable, which can maximally reach to 200℃. It’s a 90L oven with 2-layer brackets.
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during the drying process of the coating machine, and achieves the effects of dust removal and exhaust gas purification.
STC-CGC-V18 is the new generation model of TICO. Huge adjustments have been made in the position of the grooving die, from horizontal to vertical placement, and this adjustment produces a more stable battery. There are various sizes of grooving dies as options for users, like 18650, 26650, 21700, 32650. This machine is suitable for uniform automatic grooving of cylindrical steel cases (or capacitor aluminum cases).
STC-DDG-100 is a compact electric roll press used for battery electrode pressing. The pressing gap and pressing speed is adjustable. It is compact size perfect for battery research.
STC-ASC-24 disc cutter is used for coin cell precise round disc cutting. Standard cutting die φ3~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
It is a 3 in 1 machine for pouch cell research. It can be compatible with the following functions. Pouch cell top & side heat sealing before electrolyte injection. Pouch cell vacuum standing for electrolyte diffusion, different parameter can be saved. Pouch cell vacuum hot sealing.
It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.
It is an automatic crimping machine designed for cylindrical cell case crimping, feeding &discharging automatically.
It adopts the slot extrusion film coating (doctor blade coating, four-side film coating, etc. are optional). It is mainly used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
It is an automatic crimping machine designed for cylindrical cell case crimping, feeding &discharging automatically.
STC-TMH-T300 is a compact film tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
The STC-ASF-20 compact hydraulic crimping machine is used for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20xx series crimping die is included as standard, the other crimping die set is optional. Coin cell disassembly die and tablet pressing die can be optional.
STC-DRG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
STC-BDP-MA200 is a new designed semi-auto electrode stacking machine, which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch cell core.
STC-ASC-24 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
It can carry out uniform automatic grooving for cylindrical cell can, feeding & discharging automatically, high efficiency, time saving and labor saving.
STC-CJR-M30 is a compact desktop manual winding machine for winding pouch cell electrode & separator to make a battery cell core. With optional cylindrical cell winding die, it can be used for cylindrical cell winding.
The STC-CSF-18 is a compact hydraulic crimping machine for all types of cylindrical cell crimping for battery labs, such as 18650,26650,21700,AA,AAA,etc. Small size allow it to be put into glove box through big antechamber.
STC-DSL-150 manual calendering equipment is used for battery electrode making after coating and drying. It is a bench-top, manual operation with a 150mm width roller, easy to operation.
STC-ASC-24 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
It provides power supply for slurry slot extrusion film coating.
This is the coin cell decrimping die for CR20xx series, and it is made of stainless steel naterial.
The STC-CQF-18 is a compact gas driven crimping machine for all types of cylindrical cell crimping, such as 18650,26650,AA,AAA, etc. It is perfect to use it into glove box without leakage.
STC-BCK-SM200 semi-auto pouch cell case punching machine is used for aluminum-laminated case forming. IR sensor, double start buttons and visual protection cover for safety operation.
STC-BMQ-SM280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.
STC-DDG-100S is a compact electric roll press machine with winding &unwinding device, which can be used for battery electrode pressing. The pressing thickness and speed can be adjusted.
It is used for film coating on sheet-type substrate surface. It is compatible with slot extrusion coating and doctor blade coating.
STC-ADF-20 is a compact electric crimper for CR2016,CR2025,CR2032, the other crimping die set can be optional. It is touch screen controlled with high automation. Stainless steel crimping die, anti-corrosion and durable.
STC-CFT-D300 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
STC-BMQ-SM280 semi-auto electrode die cutter is used for pouch cell cathode & anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy.
The STC-AQF-20 is a compact gas driven crimping machine for all types of coin cell cases crimping, such as CR2032, CR2450, etc. CR20XX series crimping die is included as standard, the other crimping die set is optional. It is perfect to be used inside of glovebox from big antechamber, no leakage.
STC-TMH-T800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.
STC-BMQ-G120 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.
STC-DRG-100S is used for Lab battery electrode rolling press after coating and drying process. It can equip with winding & unwinding device for battery electrode after calendaring. Two sets of digital dial indicator for pressing thickness setting easily, simple operation.
STC-TM-300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.
STC-ASCC-50 is a hand-held manual disc cutter for cutting round discs, different diameter is optional. It is widely used for battery electrode cutting, foil material cutting, sampling, etc.
STC-CJR-M30 is a compact desktop manual winding machine for winding cylindrical cell electrode & separator to make a battery cell core. The winding speed is adjustable.
STC-BRF-G200 is used for pouch cell aluminum laminated case top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.
It is used for battery electrode die cutting for pouch cell cathode&anode. Compact size can be put inside glove box.
It is an electric calender used for lab battery material & non-ferrous material rolling press with heating, the thickness of rolling press is adjustable and easy to operate.
STC-CGC-H18 is TICO TECHNOLOGY new product. It is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650,26650,21700,and other cylindrical cells.
It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.
It is used for battery electrode automatic punching, equipped with various of dimension die, which can be applied in thin sheet material for hole punching.
It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.
STC-DYG-300 is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.
STC-TMH-B300 is a large electrode film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
STC-BYF-200 is a laminated-aluminum case/cup hot sealing equipment for polymer pouch cell pre-sealing after the battery electrolyte injection into the cell.
This product is the enormously popular AC pluse tab welder, controlled by single chip microcomputer. Its capability is more stable and reliable. It is designed for producing high standard NiCr, Ni-Mh, Li batteries, used for welding cylinder cell negative terminal and tab (single pin welding).
This machine a three roller transfer coating equipment, which can be used for continuous coating and intermittent electrode coating, and it is convenient to apply for surface coating for various substrates. Especially used in the lithium ion battery electrode coating.
STC-BHQ-300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.
Transferpette® electronic pipettes combines the globally proven properties of mechanical piston operated air displacement pipettes by BRAND with the advantages of an electronic device.
STC-DYG-300RS is a hot hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.
STC-BEF-200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing.
STC-DYG-300S is a hydraulic calendering press machinem, which is widely used for battery electrode rolling press process. Winding & unwinding device is optional.
It is mainly used for cylindrical cell case disassembly after the cell case crimping, in order to test the battery performance. Different die can be equipped for various size cylindrical cell.
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.
STC-CFT-D300 is a semi-auto slitting machine for battery electrode for battery research. The slitting width can be made according to requirement.
STC-4008Tn-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
STC-ASC-24 disc cutter is used for precise round disc cutting. Standard cutting die φ8~24 mm can be optional. It is available to cut various metal or foil thickness 0.005~0.5mm, especially it's a perfect tool for cutting coin cell electrode and separator.
STC-TMZ-300F3 is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.
STC-TMH-T800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.
STC-DRG-200 is used for battery electrode calendering for lab battery research after coating and drying. It has a 200mm width roller and equipped with digital dial indiactor which owns higher working efficiency.
It is used for the electrolyte injection and vacuum standing process for battery. It adopts vacuum first, then liquid injection and vacuum standing. The electrolyte has high precision, absorption consistency and high reliability.
STC-CFT-D300S semi-auto slitter is used for lab battery electrode slitting. It is an desktop, easy to operate.
The STC-ACX2X compact hydraulic disassembling machine used for all types of coin cell cases disassembling, such as CR2032, CR2450, etc. CR20xx series disassembling die is included as standard, the other die set is optional. Coin cell crimping die can be optional and easy to replace.
This machine is applied in Lithium-ion battery electrode coating process of cathode & anode. The slot extrusion coating die is used for non-contact coating to substrate, which can realize the continuous, intermittence, stripe film coating and etc.
STC-DRG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
STC-BYF-200J is is a 2 in 1 machine for pouch cell research. It can be compatible with the following functions.Pouch Cell vacuum standing for electrolyte diffusion after electrolyte injection;Pouch cell vacuum sealing after electrolyte diffusion.
STC-BJZ-300 is mainly used for absorbing the electrolyte and making it mix with electrode more completely under the condition of vacuum after injecting electrolyte to punch cell and cylindrical cell. The whole equipment is made of high-quality electronic component and materials.
This is the coin cell crimping die for CR20xx series, and it is made of stainless steel naterial.
STC-TMZ-300F2 is a film transfer coating equipment with three rollers, which is mainly used in continuous and intermittent coating film for battery electrode produce or production line.
STC-DSW-100 is a hand operation batteryelectrode rolling press machine after coating and drying. It is bench-top and compact dimension, 100mm width roller, and easy for operation.
It is used for roll-type material multiple strips continuous slitting. High accuracy slitting blade, which can carry out extremely high precision foil cutting.
It is used for cylindrical cell winding, manually load the electrode,the winding will be completed automatically.
STC-DDG-100 is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.
STC-BRF-G400 is used for Polymer pouch cell aluminum laminated cup top & side edge sealing with tab before electrolyte injection process. The heating temperature of upper and lower sealing blade can be controlled separated and adjusted.
STC-TMH-T300 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
STC-BCH-1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.
STC-BEF-300 vacuum sealer is used for pouch cell secondray hot sealing after electrolyte filling and battery formation. It is equipped with auto piercing needle for degassing the cell and do a secondary sealing under vacuum condition. 300mm copper sealing blade with good heating transfer conduction, touch screen controlled with high automation.
STC-BCH-1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.
STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
It is applied for precision measurement of high-end micro liquid medium in medicine, electrolyte, acid, solvent, diary products, glue, reagent and other industries. The high precision and compact design make it particularly perfect for battery electrolyte filling in battery lab research.
It is mainly used for pouch cell case top &side edges hot sealing, especial in vacuum glovebox. It is electric driven, no gas required.
STC-EBJ-150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It is with 150ml mixing container, other volume of mixing container is optional.
STC-BDP-MB200 is a semi-auto stacker, which is used for pouch cell anode, cathode and separator film stacking in "Z" shape to make a battery core. It is feeding material manually. Electrode position correction and laminating process are completed automatically.
It is used for pouch cell cup edges trimming after pouch cell Al-laminated film forming.
It is a multi-working stations machine for battery electrolyte injection and vacuum standing process. The electrolyte has high precision, absorption consistency and high reliability.
STC-BDP-SMC200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.
STC-KZK-502 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.
It is suitable for supercapacitor & battery electrolyte injection and standing.
STC-BCH-1000 is used for welding stacked electrode sheets (Copper & Aluminum) and tabs onto current collectors to prepare Li-ion battery in R&D laboratories. It is a 1000W ultrasonic metal welder, the welding parameter can be set to meet different welding requirement.
STC-TM-300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.
It is an automatic crimping machine for cylindrical cell case with automatic feeding & discharging.
STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.
STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.
STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.
STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.
STC-CCH-T1000 ultrasonic welder with tab mechanism is used for battery cathode &anode electrode splicing.
STC-BYF-200J is a 2-in-1 machine for pouch cell research. The key feature of this machine is compatible with the following two functions. Vacuum standing for electrolyte diffusion after electrolyte filling and hot sealing for pouch cell first sealing.
STC-VGB-11S is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.
STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
STC-BYF-200 used for aluminum laminated pouch cell vacuum hot sealing after electrolyte injection into cell.
STC-4008Tn-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.
STC-EXJ-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.
STC-BCK-G65 is a gas driven machine for aluminum-laminated film pouch cell case forming.The case punching depth can be adjustable.
STC-KZK-4D is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.
STC-BMQ-G85 is a gas driven electrode die cutter for pouch cell cathode / anode cutting for pouch cell preparation. It is a necessary equipment for pouch cell research with very high cutting accuracy. Gas driven mode, electricity is not required. Compact size can be put inside glove box.
It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.
It is used for battery electrode die cutting for pouch cell cathode & anode. Compact size can be put inside glove box.
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.
STC-BRY-200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking /winding to make it easy to put into aluminium-laminated case and pouch cell formation. The heating pressing die size is 200 x 200mm. The heating temperature room temperature ~ 250℃ adjustable.
STC-VGB-12S is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.
The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.
This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc.
STC-4008Tn-5V12A is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
It is used for pouch cell winding, manually load the electrode, the winding will be completed automatically.
STC-BDP-SMC200 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.
STC-KZK-502D is a compact vacuum drying oven equipped with inert gas valve widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions.The heating temperature max to 200℃ adjustable.
STC-KZK-904 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.
STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
STC-KZK-4D is a four-door vacuum drying machine with PLC for lithium-ion battery making. It is equipped with stainless steel liner, independent relay control and accurate temperature control.
STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
STC-KZK-252D is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 25L volume with two layers bracket.
STC-TM-300 is a compact tape casting machine with vacuum chuck, which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is compact size, perfect for laboratory research.
STC-KGF-502 is a compact drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set. Air-forced circulation system can improve the temperature uniformity inside the chamber.
Coin cell wave spring for lab battery material.
STC-TMH-T300 is a compact film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. The coating stroke length can be set. It is designed with top cover heating.
STC-TMH-T800 is a large desktop film tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc. It is designed with top cover heating, the heating temperature up to 150℃ adjustable and digital display.
Coin cell spacer for lab battery material.
This furnace provides the experiment environment of vacuum, atmosphere control and high temperature to enterprises laboratory, universities, research institutes, scientific research, research institutions, etc.
STC-KZK-252 is a compact vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is 25L volume with 2 layers bracket.
It is a three roller transfer coating equipment, which can be used for continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. especially used in the lithium ion battery electrode coating.
SUS 304 stainless steel coin cell case for cr2016
It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during battery coating process.
SUS 304 stainless steel cr2025 coin cell case
The oven inner chamber is made of stainless steel, and each working chamber runs independently. Automatic cycle for heating, vacuuming, and gas filling.
SUS 304 stainless steel coin cell case
This furnace is mainly used for carrying out the sintering, annealing and oxidation experiment for ceramic material, composite material, mental material, functional material, heating material, crystal material, etc. It is widely used for universities, research institutes, enterprise R&D centers, quality inspection units, processing industries, etc.
STC-DRG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
STC-KZK-502 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. Heating time and temperature can be set.
Coin cell conical spacer for lab battery material.
STC-DDG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
STC-KZK-502 is a compact vacuum drying oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It's a 50L vacuum oven with 2 layers bracket.
18650 Cylindrical cell stainless steel case
STC-VGB-12D is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.
SUS 304 stainless steel CR2032 coin cell case
STC-KZK-904 is a lab vacuum dry oven widely used in laboratory, it is applicable for the drying, sterilization and heat treatment for the articles under vacuum conditions. The heating temperature max to 200℃ adjustable. It is a 90L volume with four layers bracket.
This vacuum pump is an oil sealed single-stage rotary vane pump, can be used to pump inactive gas within the scope of low vacuum and a small amount of non-condensable gas, Special suitable for packaging machinery, analytical instrument, laboratory and etc.
21700 Cylindrical cell stainless steel case
STC-BHQ-300 automatic cutting machine is used for cutting roll battery electrode to the sheets. The cutting length, numbers, speed can be set.
Nickel planted strip for lab battery material
Copper foil for battery material.
STC-4008Tn-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.
Aluminum strip for lab battery material
Aluminum foil for battery material.
lab battery research material copper net
Nickel foam for battery material.
Aluminum laminated film for battery material.
STC-EBJ-150 is a bench-top vacuum mixer with vacuum mixing and dispersion function, which is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble. It has a 150ml mixing container, other volume of mixing container is optional.
STC-XQM-20B planetary ball milling machine is widely used in many fields,like geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. Different material of milling jar is optional according to the milled material.
STC-EXJ-150 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
STC-XQM-12A planetary ball milling machine is a laboratory multi-application powder material milling equipment, which is widely used in many fields, like geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc.
STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble.
STC-XQM-6B planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc.
STC-EGL-500 filtering device is mainly used for sample testing in lab, which is applied in filtering various of hard particles whose size is no less than 124µm in slurry. Exquisite appearance, and convenient to operate.
STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
It is used for 60138 Supercapacitor laser welding.
STC-XQM-0.4A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.
STC-4008Tn-5V10mA is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
It is a fully automatic winding machine for lithium batteries supercapacitor, which is with the function of monitoring winding length and diameter. It is capable to carry out chamfer, hole punching, short circuit testing, it features stable working status and technology guarantee.
This slurry feeding system is used for battery electrode coating Slurry feeding, and also can be applied in others slurry feeding. It has exquisite appearance, equips with two pumps and cache tanks for cathode & anode slurry feeding for high efficiency operation.
STC-XQM-0.2A is a supper mini model of vertical planetary ball mill, which is specially designed to be used for grinding materials under vacuum or inert gas atmosphere conditions inside the glove box. The split design makes it convenient to use inside of glovebox, it can effectively avoid the operating buttons being obscured when the lid is open.
STC-4008Tn-5V50mA is a 8 channels battery testing system used for coin cell testing from 5uA~50mA, up to 5V. It is three range, 5uA~1mA,1mA~25mA,25mA~50mA.It is a reliable device for universites.
It is mainly used for vacuum drying, nitrogen filling and cyclic baking of batteries and supercapacitors. The product is kept in an anhydrous and oxygen-free environment and transferred into the glove box for liquid injection.
STC-ESL-5L slurry feeding system is mainly used for slurry feeding when battery electrode coating, and also can be applied in other slurry feeding.
This machine is used for battery slurry iron removing and filtering.
STC-XQM-VB Micro vibration ball milling machine is a high-power micro vibration ball milling and material mixing machine, which is suitable for small batch material ball milling and mixing of small amounts of substances. It used 2 ml disposable screw microtubes, and mixing of 3 samples can be performed simultaneously (usually can be performed within 45s)
It is mainly used to trim and align the cells of batteries and supercapacitors and compact the end faces of negative poles, to facilitate laser welding the upper and lower current collectors.
STC-4008Tn-5V6A is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
STC-EXJ-5L is used for mixing dispersion of various common battery powder and liquid to achieve uniform battery slurry, especially for the high viscosity technological process. The viscosity interval of applicable operating conditions is≤1200000Cp.
This machine is a standard analytical sieve that integtrates powder classification and liquid filtration; it is suitable for laboratories and quality inspection rooms for accurate analysis of particle size structure of particles and ppowders, liquid solids content and sundries content testing analysis.
STC-XQM-2A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 500ml ports for grinding, various of material of milling jar can be optional according to experiment requirement.
STC-4008Tn-5V6A is a three range output current tester, 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
It is suitable for grooving, pre-sealing and crimping of supercapacitor cases.
STC-4008Tn-5V12A is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs.
It is used to press supercapacitors (after the welded cell is assembled with O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.
STC-4008Tn-5V5A 8 channels battery testing system mainly used for communication battery testing and extra-high accuracy battery testing. It is with 4 ranges. Fast sampling.
It is suitable for supercapacitor injection by means of vacuuming, injection and pressurization, which features high consistency, reliability and safety of electrolyte absorption.
Internal resistance testing machine is mainly used for testing the internal resistance and voltage of various batteries, with the features of small size, light weight, exquisite appearance, stabile performance and easy to carry.
It is suitable for secondary molding, sealing and crimping of battery and supercapacitor cases.
Cylindrical cell sorting machine is applied in battery grade sorting by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.
18650 Cylindrical cell sorting machine is used for sorting 18650 battery grade by testing battery internal resistance and voltage, which is equipped with high precision internal resistance & voltage testing system.
It is used for super capacitor riveting. It is manual operation, small size, a perfect decide for super capacitor lab research.
STC-SGC-OX is TICO TECHNOLOGY's new generation of cylindrical cell grooving machine, it is with touch screen, high automation. With various of grooving die, it can be used for grooving different cylindrical cells, like 18650, 26650, 21700, and other cylindrical cells.
STC-SCK-OX is used for ox-horn supercapacitor core and pole ear punching. Different size of punching die is optional, easy to replace die.
100V30A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.
It is used for cylindrical cell winding. Manually load the electrode to the winding part, winding with separator, the tape sticking and unloading will be finished automatically.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
STC-VGB-12D is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is 2 work stations glove box, one work station in front, one work station in the back.
100V20A battery testing system used for EV battery pulse charging&discharging, direct current internal resistance, cycle life and rate. It's mainly used for institutions, colleges, universities and battery factory.
It is used for supercapacitor case grooving.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
STC-VGB-33S vacuum glove box is used for battery pilot line, and factory production. It is a quick to open vacuum glove chamber with three seactions. This machine is an ideal equipment for battery pilot line and factory production.
It is used for supercapacitor case sealing.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
It is fixed thickness precision film applicator with four paths for lab small qty coating, various of models can be optional.
It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.
It is a fixed thickness precision film applicator for lab small qty coating, various of models can be optional.
Widely used for various coating researches in lab, like battery electrode, ceramic film, crystalline film, nano film, etc.
STC-VGB-11S is an internet of things vacuum glovebox, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm.
It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc.
It is used for supercapacitor electrolyte filling. Vacuuming filling and pressurization working process is used, which features high consistency, reliability and safety of electrolyte absorption.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
STC-VGB-12S is an internet of things vacuum glove box, centralized equipment management, intelligent analysis & early warning of equipment status, the abnormal alarm message is actively pushed, remote fault diagnosis and online debugging. H2O & O2<1ppm. It is double working stations in single side, big working space inside.
It is a compact device for various of coating research for lab,especially for battery electrode coating,ceramic coating ,nano film,etc.The coating width can be adjusted.
It is used supercapacitor cell core forming to makes positive and negative end surface compact, facilitate the upper and lower current collector laser welding.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
It is a compact device for various of coating research for lab, especially for battery electrode coating, ceramic coating, nano film, etc. The coating width can be adjusted.
It is used supercapacitor case secondary pressing sealing.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
STC-VGB-22S is an internet of things vacuum glovebox, centralized equipment management intelligent analysis & early warning of equipment status, the abnormal alarm message is actively sent, remote fault diagnosis and online debugging.
It is used to press supercapacitors (after the welded cell is assembled with the O-ring of the upper cover) into the case and fasten the O-ring to the inner seal.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
It is used for small Ox-horn supercapacitor aluminum can automatic spinning pressing sealing machine.
Tablet pressing machine is used for pressing the powder into piece, which is widely applied in scientific research, teaching, testing, pharmacy, catalysis, chemical industry, etc.
It is suitable for secondary molding, sealing and crimping of battery and supercapacitor cases.
STC-BMQ-SM280 semi-auto electrode die cutter is a necessary equipment for pouch cell preparation, it is used for pouch cell electrode cutting to produce specific shapes of cathode and anode with current collector tab.
STC-BCK-SM200 semi-auto case /cup forming machine is used for prepare pouch cell case made of aluminum-laminated films.IR sensor, dual start buttons and protection cover are included for safety operation.
STC-BDA200-1 is a semi-auto stacking machine which is used for stacking pouch cell anode, cathode and separator by "Z" shape to make a pouch battery cell core. The stacking size is adjustable.
STC-BRY-200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking, winding to make it easy to put into aluminum-laminated case and pouch cell formation.
STC-BRF-G200 is a pouch cell aluminum-laminated case edges hot sealing with tab machine before electrolyte filling process. The temp of upper and lower sealing head can be controlled separately and settable.
STC-BYF-200 is used for pouch cell aluminum-laminated case vacuum pre-sealing after battery liquid filling into cell.
STC-BEF-200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation.
STC-BJZ-300 is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to pouch cell.
STC-SMJ-OX is a manual riveting machine which is used for supercapacitor cap and tab riveting .
STC-SCK-OX punching machine is used for ox-horn super capacitor tab hole punching
STC-XQM-0.2A planetary ball mill is widely used for geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine.It is with 4pcs 50ml milling jars. Milling speed, time and mode can be set according to different experiment requirement.
It is the first bottle-top burette to meet class A error limits for glass burettes. In addition, it stands out for easy titration, a compact design, excellent precision, an exchangeable dosing unit.
This equipment is used for pin supercapacitor aluminum case grooving and crimping. It is a multi-functional device which is compact size, high efficiency for small size supercapacitor research.
STC-BJZ-300 is mainly used for absorbing the electrolyte and making it mixed with electrode more completely under the condition of vacuum after injecting electrolyte to cylindrical cell.
STC-XQM-0.4A planetary ball mill is widely used in many fields of geology, mine, metallurgy, electric industry, construction, ceramics, chemicals, light industry, medicine, etc. 4pcs 100ml milling containers included. Compact size, low noise, it is a perfect device for lab material milling.
STC-DDG-100 is a compact electric roll press can be used for battery electrode pressing for battery research. The pressing thickness and speed can be adjusted.
STC-ADF-20 is a compact electric crimper for CR2016,CR2025,CR2032, the other crimping die set can be optional. It is touch screen controlled with high automation. Stainless steel crimping die, anti-corrosion and durable.
STC-CGC-SM18 semi-auto cylindrical cell case grooving machine, which is mainly used in laboratory for 18650, 21700, 26650, 32650 cylindrical cell grooving.
STC-TMH-B800 is a compact tape casting film coating machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
STC-EBJ-150 is a desktop vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing under vacuum condition to remove the gas bubble.It is with 150ml mixing container, other volume of mixing container is optional.
STC-DDG-100 is used for battery electrode rolling press for battery research after coating and drying. It is with digital dial indicator, easy to operate.
STC- PT-10 is a coin cell disc cutter for electrode precision cutting, which can be easily placed into a glovebox.
STC-TM-300 is a compact tape casting machine with vacuum chuck which widely used in all kinds film coating research, like ceramic films, crystal films, lithium battery electrode coating, etc.
STC-DFT350 is a semi-auto slitting machine for cylindrical cell electrode for battery research. The slitting width can be made according to requirement.
The machine integrates ultrasonic welding and automatic tab feeding function, enhancing the efficiency and precision of the battery production. The equipment mainly consists of ultrasonic generator, transducer, upper and lower horn, pneumatic parts, frame and so on. The upper and lower horns are made of new alloy materials with good abrasion resistance.
The Intermittent coating machine is a three-roller transfer coating equipment, which can be used for continuous coating and intermittent coating. It is convenient to apply for coating on various substrates, especially used for lithium-ion battery industry.
The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.
The machine is suitable for mixing and dispersing the powder and liquid of various common types of batteries, and finally obtains evenly mixed battery slurry, and is also very suitable for high viscosity technical processes.The maximum volume of the equipment is 5L.